UTAX P 3520 MFP Driver

The UTAX P 3520 MFP driver lets Windows communicate with your printer so you can send documents to print and access the settings supported by your device. Whether you are setting up the UTAX multifunction printer for the first time, reconnecting it after a Windows reinstall, or troubleshooting printing problems, choosing the right driver is an important first step.

Key Features

• Printer communication: Enables Windows applications to send print jobs to the UTAX P 3520 MFP through the connection supported by your setup.
• Print settings: Provides access to options such as paper size, orientation, copy count, and other controls available for your printer configuration.
• Windows compatibility: Driver options cover Windows 11, 10, 8, and 7; select a package that explicitly supports your operating system and system architecture.
• Multifunction setup: Supports the printing side of your MFP installation. Scanning may require a separate driver or utility, so check the package contents if you also need scan functions.

How to Install UTAX P 3520 MFP Driver

1. Check your Windows system. Open your system information to confirm your Windows version and whether it is 32-bit or 64-bit. For Windows 10/11, you can find these details under Settings > System > About.
2. Choose the correct package. For a UTAX P 3520 MFP driver download for Windows, verify the exact model and supported operating systems. Look for the latest version compatible with your setup, and use an official vendor source for a free download when available.
3. Prepare the printer. Turn on the device and follow the package instructions for USB or network setup. If you are using a network connection, make sure the printer is reachable from your computer.
4. Install the driver. Extract the downloaded files if necessary, run the installer, and follow its prompts. If no installer is included, use Windows printer settings to add the printer and select the supplied driver files.
5. Test the installation. Print a test page and check your preferred paper and print settings. Restart Windows if the installation instructions request it.

Keep your driver updated to benefit from any compatibility fixes or improvements provided by UTAX. Before you update, confirm that the new package supports your Windows version and review its release notes, especially if your current printing setup is working reliably.

Common Issues and Fixes

• Install fails or rolls back: Remove existing UTAX P 3520 MFP entries from Printers & scanners and Device Manager, reboot, then run the correct 32/64-bit driver package as administrator. Temporarily disable antivirus if it blocks the installer.
• Device not detected: For USB, use a direct rear port and a known data cable, not a hub. For Ethernet, confirm the MFP is on the same subnet and reachable by IP; add it manually by IP if auto-discovery fails.
• Scan/print version conflicts: Uninstall older UTAX or generic drivers, clear the print spooler, and install the matching P 3520 MFP driver and scanner utility. Avoid mixing PCL and PostScript packages.