Kyocera FS 1370DN KX Driver

The Kyocera FS 1370DN KX driver connects your Windows PC to this monochrome laser printer, allowing applications to send documents with the correct print settings. It also gives you access to printer-specific controls, helping you manage everyday office printing without relying on a basic Windows driver.

Key Features

• Printer-specific settings: Adjust paper size, orientation, copy count, and print quality through the Kyocera KX printing interface.
• Two-sided printing controls: Configure automatic duplex printing for reports, manuals, and other multipage documents to reduce paper use.
• Paper source selection: Choose the appropriate paper source and media settings to match the paper loaded in the printer.
• Windows integration: Access printing preferences from compatible applications and Windows printer settings. Select a driver package that matches your version of Windows 11, 10, 8, or 7 and your system architecture.

How to Install

1. Check your Windows version. Open your PC’s system information to confirm the operating system and whether it uses a 32-bit or 64-bit architecture. Verify that the selected download explicitly supports your configuration.
2. Prepare the printer. Turn on the Kyocera FS 1370DN and load paper. For a network connection, make sure the printer is reachable from your PC and note its IP address if needed. For USB installation, follow the installer’s instructions on when to connect the cable.
3. Download and open the driver package. Extract the files if they are compressed, then launch the setup program. Allow administrator access if Windows requests it.
4. Choose the connection and printer. Follow the installation prompts to select USB or network printing and the appropriate KX driver. If network discovery does not find the printer, use its IP address where the installer offers that option.
5. Confirm settings and test printing. After installation, open the printer’s properties in Windows and print a test page. Review the paper size, paper source, and duplex preferences before starting your regular print jobs.

If printing does not start, check that the selected printer port matches the connection and that the print queue is not paused. When replacing an older driver, review existing preferences afterward, as some settings may return to their defaults.