Xerox Phaser 6180MFP D PS Driver

The Xerox Phaser 6180MFP D PS driver connects your Windows PC to this Xerox multifunction printer, allowing applications to send print jobs using PostScript (PS). It is intended for users setting up the printer, reconnecting it after a Windows reinstall, or troubleshooting printing problems with an existing installation.

Key Features

• PostScript printing: Helps applications communicate with the printer to reproduce text, graphics, and document layouts through its PS print interface.
• Print preference controls: Provides access to settings such as paper size, orientation, color mode, and print quality, depending on the driver package and printer configuration.
• Duplex and paper handling options: Lets you configure supported two-sided printing and select available paper sources for everyday office documents.
• Windows printer integration: Adds the device to the Windows printing system so compatible applications can select it and submit jobs. Scanning and fax functions may require separate software.

How to Install Xerox Phaser 6180MFP D PS Driver

1. Check your Windows setup. Identify whether you use Windows 11, 10, 8, or 7, and check your system architecture. For Windows 10/11, verify that the package explicitly supports your version rather than assuming an older driver will work.
2. Choose the appropriate package. Before starting your Xerox Phaser 6180MFP D PS driver download for Windows, confirm that the listing matches the exact model and PostScript interface. Select the latest version compatible with your system, and use a trusted free download source.
3. Prepare the connection. Turn on the printer. For a network installation, make sure your PC can reach it and note its IP address if needed. For USB setup, follow the installer’s instructions about when to connect the cable.
4. Install the driver. Run the downloaded installer and follow the prompts. If the package contains driver files without a setup program, extract them and use Windows’ Add printer option to select the supplied driver.
5. Confirm successful printing. Open the printer’s properties, review the available options, and print a test page. Check that the correct paper size and duplex settings are selected.

Keep the driver updated when a compatible release addresses printing issues or improves Windows compatibility. Before you update, compare the package requirements with your operating system and retain a working installer in case you need to restore your previous setup.

Common Issues and Fixes

• Install fails or setup stalls: Remove existing Xerox Phaser 6180MFP entries in Printers & scanners, reboot, then run the downloaded package as administrator. Temporarily disable antivirus if the installer cannot unpack the PostScript driver.
• Device not detected over USB/network: Confirm the MFP is on and ready. For USB, use a directly connected port and known-good cable. For network, verify the printer’s IP and add it manually as a TCP/IP port using the Xerox PostScript driver.
• Version conflicts or wrong driver selected: Uninstall older Xerox 6180MFP drivers and remove duplicate ports. Download the Windows package matching your OS architecture, then select “Xerox Phaser 6180MFP D PS” rather than a generic PS or PCL driver.