Xerox WorkCentre 6015NI Driver

The Xerox WorkCentre 6015NI driver helps Windows communicate with your multifunction printer, enabling print jobs and access to settings such as paper size, orientation, and color output. It is useful when setting up the device for the first time, reconnecting it after a Windows reinstall, or troubleshooting printing problems.

Key Features

• Printer communication: Provides the software Windows needs to send documents and images to your Xerox WorkCentre 6015NI over a supported connection.
• Print settings: Gives you access to available options for paper handling, output quality, and color or monochrome printing.
• Application support: Lets compatible Windows programs use the printer through the standard print dialog.
• Multifunction setup: Helps establish the printing side of your device; scanning may require a separate Xerox scan driver or utility.

How to Install Xerox WorkCentre 6015NI Driver

1. Check your Windows system. Confirm whether you use Windows 11, 10, 8, or 7, and check your system architecture. For Windows 10/11, verify that the selected package explicitly supports your operating system rather than assuming an older driver will work.
2. Choose the appropriate package. Before starting your Xerox WorkCentre 6015NI driver download for Windows, review the compatibility information and select the latest version suitable for your setup. Use a trusted Xerox source for a free download; avoid installers that require unrelated software.
3. Prepare the printer. Turn on the WorkCentre 6015NI. For a network installation, make sure the printer and computer can communicate on the same network. If using USB, follow the installer’s instructions about when to connect the cable.
4. Install the driver. Run the downloaded setup file, allow administrator access if prompted, and follow the on-screen instructions. Select the correct connection type and printer when asked.
5. Verify operation. Restart Windows if requested, then print a test page from Windows printer settings. If you also need scanning, check whether a separate scan package is available for your operating system.

Keep the driver updated when a compatible release addresses a problem or supports a change to your Windows setup. Before you update, review the release notes and compatibility details; the newest package is not always the right choice for an older operating system.

Common Issues and Fixes

• Install fails or stalls: Uninstall any existing Xerox WorkCentre 6015 driver, restart the PC, and run the 6015NI installer as administrator. Temporarily close antivirus/security tools if the installer hangs, then reconnect the printer only when prompted.
• Device not detected: For USB, connect directly to the PC and avoid hubs; for network, confirm the 6015NI has a valid IP, ping it, and add it by IP/standard TCP/IP port. Keep PC and printer on same subnet.
• Version/driver conflicts: Remove old 6015 series print queues and leftover driver packages via Print Management, restart the Print Spooler service, then install the latest Xerox 6015NI package. Avoid mixing 32-bit/64-bit or generic drivers.