Kyocera FS 1350DN KX Driver

The Kyocera FS 1350DN KX driver connects your Windows computer to the printer, allowing applications to send print jobs and use the available printing settings. For Windows 11, 10, 8, and 7, choose a driver package that matches your operating system and system architecture before installing.

Key Features

• KX printing controls: Access document settings such as paper size, orientation, copy count, and print quality from the printer preferences.
• Two-sided printing options: Configure duplex printing for compatible jobs to reduce paper use and keep longer documents easier to manage.
• Paper source selection: Choose the appropriate tray or paper source for your document, with available options depending on the printer’s installed configuration.
• Connection setup: Set up printing over USB or a local network using the appropriate connection or printer port.

How to Install

1. Check your Windows version. Open your computer’s system information and confirm both the Windows edition and system type. Select the Kyocera FS 1350DN KX driver package intended for that configuration.
2. Prepare the printer. Turn it on and make sure paper is loaded. For a network installation, connect the printer to your local network and note its IP address if needed. For USB setup, follow the installer’s instructions about when to connect the cable.
3. Start the installer. Extract the downloaded package if necessary, then run its setup program. Approve the Windows permission prompt if it appears.
4. Select the printer and connection. Follow the setup prompts to detect the device or specify its network address. If the package has no setup program, use Windows’ Add Printer option and browse to the extracted driver files when prompted.
5. Verify the installation. Open the printer’s properties and print a test page. Review paper size, duplex settings, and tray options so they match your normal printing needs.

If the printer does not appear during setup, check the USB cable or network connection before trying again. On shared networks, confirm that your computer can reach the printer’s IP address and that you have permission to install printer drivers.