Xtium-CLHS PX8 CamSim Driver

The Xtium-CLHS PX8 CamSim driver enables Windows to communicate with Teledyne Dalsa’s Camera Link HS camera-simulation hardware. It is intended for developers, machine-vision integrators, and technicians who need to configure the device and use it with compatible software when testing imaging systems.

Key Features

• Hardware communication: Provides the software interface needed for Windows and compatible applications to access the Xtium-CLHS PX8 CamSim.
• Camera-simulation workflows: Supports use of the hardware in Camera Link HS development and testing setups, rather than as a standard USB webcam.
• Integration with compatible tools: Allows supported Teledyne Dalsa software to work with the installed device; required utilities and dependencies may vary by package.
• Version-specific Windows support: Driver packages may target Windows 10, 8.1, 7, Vista, or XP. Check the individual release documentation for the supported operating system and architecture.

How to Install Xtium-CLHS PX8 CamSim Driver

1. Identify your system. Check your Windows version and whether it is 32-bit or 64-bit. For Windows 10/11 systems, note that Windows 10 is listed as supported, while Windows 11 compatibility should not be assumed.
2. Select the appropriate package. Before starting your Xtium-CLHS PX8 CamSim driver download for Windows, confirm that the package explicitly covers this model and your operating system. Choose the latest version compatible with your setup, not simply the newest release available.
3. Check the download source. Use a trusted, manufacturer-provided package where possible. If offered as a free download, verify the publisher and package details before running it.
4. Install the software. Extract the files if necessary, then follow the supplied installation instructions. Run the installer with administrator permissions when required, and follow any guidance about hardware installation order or prerequisite software.
5. Restart and verify operation. Restart Windows if prompted. Check Device Manager for device errors, then use compatible configuration or test software to confirm that the hardware is recognized.

Keep your driver updated when a compatible release addresses an issue or improves your workflow. Before you update a working system, review the release notes and retain the previous installer so you can restore your tested configuration if needed.

Common Issues and Fixes

• Install fails or rolls back: Run the installer as administrator, close Sapera LT/GenICam applications, and temporarily disable Windows driver signature enforcement if the DALSA Xtium driver is blocked; reboot before retrying.
• Device not detected: Confirm the Xtium-CLHS PX8 is in a PCIe x8 or larger slot, fully seated and powered; check Device Manager for the frame grabber, then verify the CLHS cable/CamSim simulator is configured and a valid camera file is loaded in Sapera.
• Version conflicts: Uninstall older Teledyne DALSA/Sapera LT drivers and runtime before upgrading; match Sapera LT, Xtium driver, and CamSim configuration versions, then reboot and reinstall.