Xtium-CL PX4 Board Driver

The Xtium-CL PX4 Board driver enables Windows to communicate with Teledyne Dalsa’s Camera Link frame grabber, allowing compatible imaging software to access connected cameras. It is intended for users setting up machine vision, inspection, or image-acquisition systems that rely on this board rather than a standard USB webcam.

Key Features

• Board recognition: Helps Windows identify the Xtium-CL PX4 Board and makes it available to compatible acquisition software.
• Camera Link acquisition support: Provides the software interface needed to capture image data from compatible cameras through the board.
• Imaging software integration: Works as part of a compatible Teledyne Dalsa software setup for configuring and operating the acquisition hardware.
• Windows compatibility: Supports installations on Windows 10, 8.1, 7, Vista, and XP when the appropriate driver release is selected. Check each package’s requirements before installing.

How to Install Xtium-CL PX4 Board Driver

1. Check your system. Confirm your Windows edition and whether it is 32-bit or 64-bit. Verify that the installed hardware is the Xtium-CL PX4 Board, since similarly named boards may require different packages.
2. Select a compatible package. Before starting your Xtium-CL PX4 Board driver download for Windows, check the release notes for your operating system and imaging software. Choose the latest version that explicitly supports your configuration. For Windows 10/11 systems, note that Windows 11 support is not confirmed by the compatibility list above.
3. Download from a trusted source. Use a vendor-provided package where available. If a listing offers a free download, verify its origin and compatibility rather than relying on the download label alone.
4. Run the installer. Close acquisition applications, extract the package if necessary, and install it using an administrator account. Follow any instructions for required software components and restart Windows if prompted.
5. Verify operation. Check Device Manager for hardware warnings, then open your compatible imaging application or configuration utility. Confirm that it detects the board and can acquire images from the connected camera.

Keep the driver updated when a compatible update addresses an issue, improves stability, or supports your imaging software. Review the release notes first, especially on older Windows versions, and keep a copy of your working installer so you can restore a known-good setup if needed.

Common Issues and Fixes

• Driver install fails or rolls back: Run the Xtium-CL PX4 installer as administrator, temporarily disable antivirus, and use the driver version matching your Windows build. Check Device Manager for code 28/52; if present, remove the failed device, reboot, and reinstall.
• Board or camera not detected: Reseat the Xtium-CL PX4 in a supported PCIe slot and confirm it appears in Device Manager. Verify Camera Link cable seating, camera power, and trigger settings; then check the board and camera in Teledyne DALSA Sapera Device Manager.
• Version conflicts with Sapera LT: Uninstall older Xtium drivers and Sapera LT runtimes, remove hidden devices, reboot, then install the matched Xtium-CL PX4 driver and Sapera LT release. Avoid mixing runtimes from other DALSA frame grabbers.