Xerox WorkCentre PE220 Driver

The Xerox WorkCentre PE220 driver connects this multifunction printer to your Windows PC, allowing applications to send print jobs and use the settings available in the installed software. If you are setting up the device, reconnecting it after a Windows reinstall, or troubleshooting printing problems, choosing the correct driver is an important first step.

Key Features

• Printer communication: Helps Windows recognize the Xerox WorkCentre PE220 and send documents to it correctly.
• Printing preferences: Provides access to supported options such as paper size, orientation, and print quality.
• Application support: Enables printing from everyday Windows programs, including document editors and PDF readers.
• Device-specific configuration: Uses settings designed for this model rather than relying solely on a generic printer driver. Scanning may require separate compatible software.

How to Install Xerox WorkCentre PE220 Driver

1. Check your Windows system. Identify whether you use Windows 11, 10, 8, or 7 and whether your system is 32-bit or 64-bit. For Windows 10/11, verify compatibility carefully: this is an older device, and native drivers may not be available for every system.
2. Choose a compatible package. Before starting your Xerox WorkCentre PE220 driver download for Windows, check the package’s supported operating systems and model listing. Select the latest version compatible with your setup, not simply the newest file.
3. Download and prepare. Use a trusted source offering a free download, save the package, and extract it if necessary. Keep the printer powered on, but follow the installer’s instructions about when to connect its USB cable.
4. Run the installer. Open the setup file and follow the prompts to install the driver. If the package has no installer, use Windows printer settings to add the printer and browse to the extracted driver files.
5. Verify printing. Restart the computer if requested, then print a test page. If printing fails, check the USB connection, selected printer, and print queue before reinstalling.

Keep your driver updated when a compatible release addresses a problem or supports a system change. Before you update, review compatibility notes and keep a copy of your working installer. If your printer already works reliably and no newer supported package exists, there is no need to replace it just to have a different version.

Common Issues and Fixes

• Install fails or rolls back: The PE220 package may not run correctly on newer Windows. Run the Xerox installer as Administrator, use Windows compatibility mode for the listed OS, and install the correct 32/64-bit package. Disconnect the USB cable until setup prompts for it.
• Device not detected: Use a direct USB port, not a hub, and try a known-good USB 2.0 cable. Power-cycle the WorkCentre PE220, then open Print Management and remove stale Xerox printer entries before reinstalling.
• Driver/version conflicts: Old Xerox print or scanner drivers can block the PE220. Uninstall previous Xerox software, delete leftover queues in Print Management, reboot, then install only the matching PE220 driver set.