Xerox WorkCentre 7335 V4 PCL6 Driver

The Xerox WorkCentre 7335 V4 PCL6 driver connects your Windows PC to the Xerox WorkCentre 7335 printer, allowing applications to send print jobs using PCL6. It is intended for users setting up this office multifunction device, reconnecting an existing printer, or replacing a missing or incompatible print driver.

Key Features

• PCL6 printing support: Enables compatible Windows applications to send documents, spreadsheets, and other everyday office files to the printer.
• Print preference controls: Provides access to settings such as paper size, orientation, and copy count, with additional options depending on the driver package and printer configuration.
• Office printer setup: Helps Windows recognize and use the WorkCentre 7335 through a supported connection, including a configured network print queue.
• Device-specific configuration: Allows available paper trays and finishing options to be matched to the printer’s installed hardware where supported.

How to Install Xerox WorkCentre 7335 V4 PCL6 Driver

1. Check your Windows version. Confirm your operating system and system architecture before choosing a package. For Windows 11, 10, 8, or 7, verify compatibility individually; V4 drivers are not supported on Windows 7, which requires an appropriate alternative driver.
2. Select the compatible package. When choosing a Xerox WorkCentre 7335 V4 PCL6 driver download for Windows, check the package’s supported models and operating systems. Choose a free download from an official Xerox source and select the latest version compatible with your PC.
3. Prepare the printer. Turn it on and confirm that its connection is working. For network installation, have the printer’s IP address or shared queue name ready.
4. Install the driver. Run the supplied installer, or extract the package and use Windows’ Add printer wizard to select the driver files when prompted.
5. Verify the setup. Review printing preferences and print a test page. On Windows 10/11, check that the correct print queue is selected before printing from an application.

Keep the driver updated when Xerox provides a compatible release that addresses your needs. Before an update, review compatibility notes and retain your working printer settings. This print driver does not necessarily include scanning or other multifunction software.

Common Issues and Fixes

• Install fails or rolls back: Uninstall any existing Xerox WorkCentre 7335 driver and reboot. Run the V4 PCL6 installer as administrator and match the Windows architecture (32/64-bit).
• Device not detected: Confirm the WorkCentre 7335 is on the network and ping its IP. Create a Standard TCP/IP port with the correct address rather than relying on WSD; for USB, check the cable and restart the Print Spooler service.
• Version conflicts or duplicate queues: Remove older PCL/PostScript Xerox drivers and duplicate WorkCentre 7335 queues. Keep only the official V4 PCL6 package, clear stuck print jobs, and set the correct queue as default.