Xerox Phaser 3320 Driver

The Xerox Phaser 3320 driver connects this monochrome laser printer to your Windows PC, allowing applications to send print jobs and use the printer’s available settings. It is needed when setting up the printer for the first time, moving it to another computer, or troubleshooting printing problems after a Windows upgrade.

Key Features

• Reliable print communication: Helps Windows send documents to the Xerox Phaser 3320 over a supported USB or network connection.
• Print quality controls: Provides access to settings such as resolution and toner-saving options, depending on the driver package.
• Paper and layout settings: Lets you choose paper sizes, select available trays, and configure double-sided printing where supported.
• Windows integration: Makes the printer available to compatible applications and provides printing preferences through Windows printer settings.

How to Install Xerox Phaser 3320 Driver

1. Check your Windows version. Confirm whether your PC runs Windows 11, 10, 8, or 7, and check its system type. For Windows 10/11, use a package explicitly listed as compatible with your operating system rather than assuming an older driver will work.
2. Choose the appropriate package. Before starting your Xerox Phaser 3320 driver download for Windows, review the compatibility details and select the latest version suitable for your system. Prefer an official Xerox package offered as a free download.
3. Prepare the printer. Turn it on and ensure it has paper and toner. For a network setup, connect the printer to a network your PC can access. For USB installation, follow the installer’s instructions about when to connect the cable.
4. Run the installer. Open the downloaded package, approve the Windows permission prompt if shown, and follow the instructions to install the driver. Select the correct connection type and printer when prompted.
5. Verify the setup. Open Windows printer settings and print a test page. If the printer is not detected, check the cable or network connection before trying again.

Keep the driver updated to benefit from fixes and compatibility improvements when Xerox provides them. Check for a suitable update after major Windows changes or if printing becomes unreliable, and review the package notes before replacing a working driver.

Common Issues and Fixes

• Install fails or rolls back: Disconnect the Phaser 3320 USB cable, remove partial Xerox driver entries in Devices and Printers, then run the installer as administrator. Reconnect only when prompted. For shared printers, install the matching 32/64-bit driver on the print server first.
• Device not detected: Power-cycle the printer, test another USB port/cable without a hub, or confirm the network IP for Ethernet. Check Device Manager for USB recognition and install the Xerox Phaser 3320 driver instead of relying on a generic Windows PCL driver.
• Version/driver conflicts: Uninstall older Xerox or generic PCL drivers, restart, and install one Phaser 3320 package matching Windows architecture. Avoid mixing 32-bit and 64-bit drivers on shared print queues.