Sharp AR 5520S Driver

The Sharp AR 5520S driver lets Windows communicate with your Sharp printer so you can send documents to print and access the settings available for your device. If you’re setting up this printer for the first time, reconnecting it after a Windows reinstall, or troubleshooting printing problems, choosing the right driver is an important first step.

Key Features

• Printer communication: Enables Windows and compatible applications to send print jobs to the Sharp AR 5520S.
• Print settings: Provides access to supported options such as paper size, orientation, and copy count.
• Everyday document printing: Supports routine office tasks, including printing reports, forms, and correspondence.
• Windows setup support: Helps you configure the printer with a package matched to your Windows version and system architecture.

How to Install Sharp AR 5520S Driver

1. Check your Windows system. Confirm whether you use Windows 11, 10, 8, or 7, and check whether your installation is 32-bit or 64-bit. For Windows 10/11, pay particular attention to the package’s compatibility notes rather than assuming an older driver will work.

1. Choose the appropriate package. Before starting your Sharp AR 5520S driver download for Windows, verify that the listing specifically includes your printer model and operating system. Select the latest version that supports your setup; a newer release for another model is not a suitable substitute.

1. Download and prepare the files. Use a trusted source for the free download, then extract the archive if necessary. Keep the printer powered on, but follow the package instructions about when to connect its cable.

1. Run the installer. Open the setup file and follow the prompts to install the driver. If the package has no installer, use Windows’ printer setup options to add the printer and browse to the extracted driver files when prompted.

1. Verify the connection. Restart your computer if requested, then print a test page from the printer’s Windows settings. If printing fails, check the cable, selected printer, and print queue before reinstalling.

Keep your driver updated when a compatible release addresses a printing issue or supports a Windows change. Before you update, review the release notes and confirm model compatibility. If the printer already works reliably, avoid replacing its driver with an unverified package simply because it is labeled newer.

Common Issues and Fixes

• Install fails or rolls back: Disconnect the AR 5520S, remove old Sharp printer entries in Print Management, restart the Print Spooler, then run the installer as administrator.
• Device not detected: For USB, use a direct rear port and a known-good cable; for network, confirm the AR 5520S IP address, ping it, and add a Standard TCP/IP port manually if discovery fails.
• Driver version conflicts: Uninstall existing Sharp PCL/PS drivers before installing the Windows driver for the AR 5520S; avoid mixing old and new Sharp driver packages, then reboot and re-add the printer.