Intel Embedded Server RAID Technology Driver

The Intel Embedded Server RAID Technology driver enables Windows to communicate with the supported onboard RAID controller and access storage configured through it. Listed under Lsi in the Storage category, this driver is intended for users setting up Windows, restoring a missing storage controller, or troubleshooting driver-related access problems on compatible systems.

Key Features

• Controller recognition: Helps Windows identify supported Intel Embedded Server RAID Technology hardware instead of leaving it listed as an unknown storage device.
• RAID storage access: Provides the connection Windows needs to read and write data on RAID volumes configured through the controller’s firmware.
• Windows setup support: A compatible extracted driver package can help Windows Setup detect RAID storage when the required controller driver is not included.
• Legacy Windows compatibility: Packages may be available for Windows 10, 8.1, 7, Vista, and XP. Support depends on the specific controller, system model, and driver release.

How to Install Intel Embedded Server RAID Technology Driver

1. Identify your hardware and Windows edition. Check your system documentation or the controller’s hardware IDs in Device Manager. Confirm whether Windows is 32-bit or 64-bit before choosing a package.

1. Select a compatible download. When choosing an Intel Embedded Server RAID Technology driver download for Windows, match the package to your controller and operating system. Choose the latest version approved for your hardware, not simply the newest file available. For Windows 10/11 systems, note that Windows 11 is not included in the supported OS list provided here.

1. Prepare before making changes. Back up important files and review any included installation instructions. A free download should still come from a trusted source. Do not change the BIOS storage mode or RAID configuration just to make a driver install.

1. Install the driver. Extract the downloaded archive if necessary. Run the included installer, or open Device Manager, select the storage controller, choose Update driver, and browse to the extracted driver folder. During a clean Windows installation, use Load driver if Setup cannot see the RAID volume.

1. Restart and verify operation. Reboot if prompted, then check Device Manager for warning icons and confirm that the expected drives and volumes are accessible.

Keep the driver updated when a compatible release addresses a problem, improves stability, or supports your Windows configuration. Before each update, review the release notes and maintain a current backup, particularly when Windows boots from a RAID volume.