HP LaserJet Professional M1132 MFP Driver

The HP LaserJet Professional M1132 MFP driver helps Windows communicate with your HP multifunction printer so you can print documents and, with the appropriate scanner software, scan pages to your computer. You may need it when setting up the device for the first time, reconnecting it after a Windows reinstall, or troubleshooting a printer that is not responding.

Key Features

• Reliable printer communication: Enables compatible Windows systems to send print jobs to the HP LaserJet Professional M1132 MFP over its USB connection.
• Print settings access: Provides controls for supported options such as paper size, orientation, print quality, and multiple copies.
• Scanning support with suitable software: A full-feature package may include the components needed to scan documents; a print-only driver will not provide every multifunction feature.
• Windows setup options: Helps you configure the printer on Windows 11, 10, 8, or 7 when a compatible package is available. Check the package details carefully, particularly for Windows 10/11.

How to Install HP LaserJet Professional M1132 MFP Driver

1. Check your Windows version. Open your system information to confirm your Windows edition and whether it uses a 32-bit or 64-bit architecture. Match these details to the download’s compatibility information.
2. Choose the appropriate package. Before starting your HP LaserJet Professional M1132 MFP driver download for Windows, confirm the exact printer model and supported operating system. Select the latest version compatible with your setup, and choose full-feature software if you also need scanning tools. A legitimate driver should be available as a free download.
3. Prepare the printer. Turn it on, load paper, and close unnecessary applications. Follow the installer’s instructions about when to connect the USB cable rather than connecting it prematurely.
4. Run the installer. Open the downloaded file, allow the requested Windows permissions if you trust its source, and follow the prompts to install the software. Connect the printer when requested.
5. Test the setup. Restart Windows if prompted, then print a test page. If you installed scanner software, try scanning a document as well.

Keep the driver updated to benefit from any available fixes and compatibility improvements. Before you update, verify that the replacement package supports your operating system and the M1132 MFP specifically; a newer package for a different model is not a suitable substitute.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable, remove any incomplete HP M1132 entries, restart Windows, then run the HP LaserJet Professional M1132 MFP full-feature driver as administrator. Reconnect USB only when prompted.
• Device not detected: Connect the MFP directly to a USB 2.0 port—not a hub—and try a known-good cable. Power on the printer, clear stuck jobs, and restart the Print Spooler. For scanning, install the full HP software, not just a basic print driver.
• Version conflicts or duplicate queues: Remove old HP LaserJet M1130/M1132 drivers and duplicate print queues in Print Management, reboot, then install one matching 32-bit or 64-bit package. Avoid mixing Windows Update drivers with HP full software.