Epson Stylus Photo 1390 Series Driver

The Epson Stylus Photo 1390 Series driver lets Windows communicate with your printer and provides the controls needed to prepare documents and photos for printing. Installing a compatible driver helps you select suitable paper settings, adjust print quality, and use the printer’s photo-printing capabilities.

Key Features

• Photo print settings: Access quality options for everyday images and detailed photo prints, with settings that help balance output quality and printing speed.
• Paper and layout controls: Choose paper size, media type, orientation, and borderless printing where supported by the selected paper and driver.
• Color adjustment options: Configure available color settings to suit your workflow, whether you manage color in the printer driver or in a photo-editing application.
• Maintenance tools: Compatible driver packages may include access to nozzle checks, print head cleaning, and alignment tools to help troubleshoot print-quality problems.

How to Install

1. Check your Windows version. Before downloading, confirm whether your computer runs Windows 11, 10, 8, or 7 and check its system architecture. Choose a package explicitly listed as compatible with your setup; older printer drivers may not support every Windows release.
2. Prepare the printer. Load paper and make sure the Epson Stylus Photo 1390 Series is ready. If you are using a USB connection, leave the cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.
3. Run the downloaded installer. Extract the files first if necessary, then open the setup program. Allow Windows to make changes when prompted and follow the on-screen instructions.
4. Complete the connection. Connect the printer when requested and wait for setup to finish. If the printer is not detected, check the cable and try a direct USB port rather than a hub.
5. Verify the installation. Open Windows printer settings, select the printer, and print a test page. Before printing photos, check that the selected paper size and media type match the paper loaded in the tray.

Common Issues and Fixes

• Installer fails or stops midway: Run the Epson setup as administrator, disconnect other USB printers, and temporarily disable antivirus. If using an older driver package, try Windows compatibility mode for Windows 7/8.
• Printer not detected: Connect the Stylus Photo 1390 directly to a rear USB port—avoid hubs. Power the printer on, check Device Manager for unknown devices, then reinstall the driver.
• Driver version conflicts: Remove existing Epson Stylus Photo 1390 entries in Print Management and Settings > Printers, reboot, then install the latest Epson package. Avoid mixing Windows Update drivers with the Epson installer.