Canon PIXMA MX700 Driver

The Canon PIXMA MX700 driver enables Windows to communicate with your all-in-one printer, helping applications send documents and photos with the correct print settings. A compatible package also provides access to device-specific options and may include the components needed for scanning.

Key Features

• Printer-specific controls: Adjust paper size, media type, orientation, and print quality to suit everyday documents or photo projects.
• Scanning support: Compatible scanner components allow supported Windows applications to acquire images and documents from the flatbed or automatic document feeder.
• USB and network setup: Configure the PIXMA MX700 for a direct USB connection or use its wired Ethernet connection to make it available on a local network.
• Maintenance access: Depending on the package, Canon utilities can provide functions such as nozzle checks, print-head cleaning, and alignment to help troubleshoot print-quality issues.

How to Install

1. Check your Windows version. Before downloading, confirm whether your PC uses Windows 11, 10, 8, or 7 and whether it requires a 32-bit or 64-bit driver. This is an older printer, so verify the package’s compatibility notes rather than assuming every release supports each Windows version.
2. Select the appropriate package. Choose a Canon PIXMA MX700 printer driver that matches your system. If you need scanning, check whether scanner support is included or requires a separate download.
3. Prepare the connection. Turn on the printer. For USB installation, leave the cable disconnected until prompted by the installer. For network installation, connect the printer to your router with an Ethernet cable and ensure your computer can access that network.
4. Run the installer. Open the downloaded file, approve the Windows permission prompt if requested, and follow the setup instructions. Select the correct connection type and printer when prompted.
5. Verify operation. Restart your computer if requested, then print a test page from Windows printer settings. If you installed scanner components, try a preview scan as well.

If the installer does not support your Windows version, check Canon’s compatibility guidance before attempting an older package. Windows may offer basic printing support, but scanning and maintenance features can vary.

Common Issues and Fixes

• Install fails or stalls: Disconnect the MX700, uninstall older Canon PIXMA software, reboot, then run the MX700 setup as administrator. Temporarily pause antivirus if the installer hangs.
• Device not detected: For USB, use a rear port and a known-good cable. For Ethernet, confirm the MX700 has an IP on the same subnet and allow Canon IJ Network Tool through Windows Firewall.
• Driver/version conflicts: Remove stale PIXMA MX700 entries in Print Management, restart the print spooler, and install the matching 32/64-bit Canon package. Avoid the generic Windows driver if you need scanning.