Canon MP140 Series Driver

The Canon MP140 Series driver helps Windows communicate with your Canon all-in-one printer, allowing applications to send print jobs and access the settings available for the device. An appropriate driver package can also provide scanning support, so check its included components if you need both printing and scanning.

Key Features

• Print controls: Adjust options such as paper size, media type, orientation, and print quality to suit everyday documents or photos.
• Scanning support: Compatible scanner components let supported software receive scans from the MP140’s flatbed scanner.
• Maintenance tools: Depending on the package, access utilities for tasks such as nozzle checks, print-head cleaning, and alignment.
• Device communication: Helps Windows recognize the connected printer and display available device status information.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and whether it uses a 32-bit or 64-bit system. The Canon MP140 Series is an older model, so verify that the selected package explicitly supports your setup; native drivers may not be available for newer Windows versions.
2. Choose the appropriate download. Review the package description for printer support, scanner components, and any installation requirements. Avoid assuming that a printing-only package includes scanning tools.
3. Prepare the printer. Turn on the MP140 and close any open printing or scanning applications. For a USB installation, leave the cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.
4. Run the installer. Open the downloaded setup file, approve the Windows permission prompt, and follow the on-screen instructions. Connect the USB cable when requested.
5. Verify operation. Restart your computer if prompted, then locate the printer in Windows settings and print a test page. If you installed scanner support, try a scan as well.

If installation fails or Windows does not detect the printer, check the USB connection and confirm package compatibility before trying again. A driver intended for an older Windows release is not guaranteed to work on Windows 10 or 11.

Common Issues and Fixes

• Install fails or stalls: Run the Canon MP140 Series setup as administrator. On newer Windows, try compatibility mode for an earlier Windows version, and connect the USB cable only when the installer prompts.
• Printer not detected: Use a direct rear USB port, not a hub. Power-cycle the MP140, check Device Manager for an unknown device, then reinstall the driver.
• Driver/software conflicts: Uninstall older Canon MP drivers and MP Navigator EX first, reboot, then install one matching MP140 Series package. Avoid mixing drivers from different sources.