Intel(R) 7 Series/C216 Chipset Family 2 port Serial ATA Storage Controller - 1E09 Driver

The Intel(R) 7 Series/C216 Chipset Family 2 port Serial ATA Storage Controller – 1E09 driver helps Windows identify and work with the Intel SATA controller that connects compatible storage drives to your system. It is relevant when reinstalling Windows, resolving an unrecognized storage controller in Device Manager, or restoring the correct chipset configuration on a supported Intel-based computer.

Key Features

• Controller identification: Helps Windows recognize the 1E09 storage controller and display the appropriate device information in Device Manager.
• SATA storage support: Works with the system’s storage configuration to support communication with drives connected through this controller.
• System-specific compatibility: Intended for matching Intel chipset hardware, with package selection dependent on your computer model, Windows version, and system architecture.
• Configuration support: Depending on the package, supplies device identification information or storage-related components. Some chipset packages use Windows’ built-in storage driver rather than replacing it.

How to Install Intel(R) 7 Series/C216 Chipset Family 2 port Serial ATA Storage Controller – 1E09 Driver

1. Confirm your hardware. Open Device Manager and locate the controller under IDE ATA/ATAPI controllers, Storage controllers, or Other devices. Check Properties > Details > Hardware Ids for the Intel vendor identifier and device ID 1E09.

1. Check Windows compatibility. Select a package explicitly supporting your system: Windows 10, 8.1, 7, Vista, or XP, as applicable. Match the 32-bit or 64-bit edition. For Windows 10/11 systems, do not assume Windows 10 support also means Windows 11 compatibility.

1. Choose a trusted package. When selecting an Intel(R) 7 Series/C216 Chipset Family 2 port Serial ATA Storage Controller – 1E09 driver download for Windows, prioritize your computer manufacturer’s approved package or an applicable Intel release. A free download should not require a paid driver-updater subscription.

1. Prepare and install. Back up important files and create a restore point where available. Run the included installer, or use Device Manager > Update driver > Browse my computer for drivers if the package provides compatible INF files. Do not change the BIOS SATA mode just to install a driver.

1. Restart and verify. Reboot if prompted, then check Device Manager for warning icons and confirm your connected drives remain accessible.

Keep the driver updated when a compatible release addresses a problem or is recommended by your system manufacturer. The latest version is useful only if it supports your exact hardware and operating system; avoid forcing an update on a stable system with an incompatible package.