Xtium-CLHS PX8 Board Driver

The Xtium-CLHS PX8 Board driver enables Windows to communicate with Teledyne Dalsa’s Camera Link HS frame grabber, supporting image acquisition from compatible cameras. It is intended for users setting up or maintaining machine vision, inspection, and scientific imaging systems that use this board.

Key Features

• Board recognition: Provides the software interface Windows needs to recognize and access the Xtium-CLHS PX8 Board.
• Camera Link HS acquisition: Supports image transfer between compatible cameras and host software through the frame grabber.
• Imaging software integration: Helps compatible acquisition applications communicate with the board when the required Teledyne Dalsa software components are installed.
• System maintenance: An appropriate driver update can address compatibility issues and deliver fixes documented in the package’s release notes.

How to Install Xtium-CLHS PX8 Board Driver

1. Confirm your hardware and Windows edition. Verify that your board is the Xtium-CLHS PX8 model. Listed operating systems include Windows 10, 8.1, 7, Vista, and XP, but individual driver releases may support only a subset. Check the package’s requirements and whether your system needs a 32-bit or 64-bit driver.
2. Choose a compatible package. Before starting your Xtium-CLHS PX8 Board driver download for Windows, review the release notes for supported hardware, operating systems, and required acquisition software. Select the latest version compatible with your configuration, rather than assuming the newest release supports older Windows editions.
3. Download and prepare. Use a trusted, vendor-authorized source for a free download when available. Extract the package if necessary, close imaging applications, and follow any instructions about removing an older driver.
4. Install the driver. Run the installer with administrator privileges and follow its prompts. Install any required supporting components, and restart Windows if requested. Follow the board’s hardware guide if physical installation is also needed.
5. Verify operation. Check Device Manager for warning symbols, then use compatible acquisition software to confirm that the board and connected camera work correctly.

Keep the driver updated when a release offers relevant fixes or supports a planned software change. For Windows 10/11 systems, check compatibility carefully: Windows 10 is listed here, but Windows 11 support is not confirmed. Before you update a working imaging workstation, save its configuration and retain the previous installer so you can recover if needed.

Common Issues and Fixes

• Driver install fails: Run the Teledyne DALSA installer as Administrator and install the matching Sapera LT runtime first. Antivirus or Windows driver-signing/secure-boot policies can block the Xtium-CLHS PX8 driver—temporarily disable them, reboot, and retry.
• Board not detected: Reseat the PCIe card in an x8/x16 slot, confirm BIOS PCIe enumeration, and check Device Manager for the Xtium-CLHS board under imaging/DALSA devices. Verify Camera Link HS cabling and power to the camera.
• Version conflicts: Mixing Sapera LT, Xtium-CLHS driver, or DALSA Device Manager versions causes acquisition errors. Uninstall old Sapera/Xtium packages, reboot, then install one matched Teledyne DALSA release and confirm the board firmware/driver versions align.