The Behringer X USB Audio driver lets Windows communicate with compatible Behringer hardware through its X-USB audio interface, enabling audio recording and playback over USB. Installing the correct driver helps your recording software access the interface’s inputs and outputs and provides the controls needed to configure audio performance.

Key Features

• USB audio input and output: Connects compatible Behringer equipment to your computer for sending and receiving audio through recording, mixing, and playback applications.
• ASIO support: Allows compatible digital audio workstations to use the interface through ASIO, with adjustable buffer settings to balance responsiveness and reliable playback.
• Multichannel routing: Makes the audio channels supported by your hardware available to compatible software, helping you record separate sources or return computer audio to your setup.
• Audio configuration controls: Provides access to supported sample-rate and buffer options so you can match the interface settings to your recording project.

How to Install

1. Check your hardware and Windows version. Confirm that your Behringer equipment uses the X-USB interface. For Windows 11, 10, 8, or 7, choose a driver package that explicitly supports your operating system and system architecture; not every driver release supports every Windows version.
2. Download and prepare the installer. Save the matching Behringer X USB Audio driver package to your computer. Extract it if necessary, close audio applications, and check any included instructions for when to connect the hardware.
3. Run the setup program. Launch the installer and approve the Windows administrator prompt if requested. Follow the on-screen instructions, connecting or disconnecting the USB interface only when directed.
4. Connect and configure the device. After installation, restart Windows if prompted. Power on your Behringer hardware and connect it directly to a suitable USB port. In your audio software, select the Behringer ASIO driver when available, then enable the inputs and outputs you need.
5. Test recording and playback. Play a familiar audio track or record a short signal to confirm that routing and levels are correct. If you hear clicks or dropouts, increase the buffer size and check that the hardware and project sample rates agree.

For everyday Windows sound, you may also need to select the appropriate playback or recording endpoint in Sound settings. If the interface is not detected, check the USB cable, try another port, and verify that the installed package matches your hardware.

Common Issues and Fixes

• Installer fails or stalls: Run the Behringer setup as administrator, disconnect the X USB Audio until prompted, temporarily disable antivirus, and reboot before retrying. Remove partial installs via Apps & Features first.
• Device not detected: Connect directly to a rear USB port with a known-good cable—avoid hubs. Check Device Manager for “Unknown USB Device,” power-cycle the interface, and reinstall the driver if it still does not appear.
• Driver/version conflicts: Uninstall older Behringer USB Audio drivers and conflicting ASIO drivers (e.g., ASIO4ALL) before installing the latest package. Reboot, then reconnect the interface and confirm it appears in Windows Sound and your DAW’s audio device list.