The AVerMedia A868 USB ATSC is a USB TV tuner designed to receive ATSC digital television broadcasts. Its driver lets Windows communicate with the tuner so compatible TV software can detect the hardware and access its reception functions. When choosing a download for Windows 11, 10, 8, or 7, check the package’s compatibility details rather than assuming one driver supports every version.

Key Features

• USB tuner recognition: Helps Windows identify the A868 as a TV tuner and make it available to compatible applications.
• ATSC hardware access: Provides the connection between the tuner and software used to scan for and watch available digital broadcast channels.
• Application support: Enables compatible viewing and recording software to interact with the device; a separate TV application may be required.
• Device configuration: Installs the driver components needed for Windows to manage the tuner, making its status easier to check in Device Manager.

How to Install

1. Confirm your Windows version. Check whether your computer runs Windows 11, 10, 8, or 7 and whether it uses a 32-bit or 64-bit system. Select an AverMedia driver package that explicitly matches the A868 model and your operating system.

1. Prepare the download. Save the package to an accessible folder and extract it if it is compressed. Close any TV-viewing or recording applications, then review any included installation instructions.

1. Install the driver. If the package includes an installer, run it and approve the administrator prompt. Follow its directions about when to connect the tuner. For a driver-only package, connect the device, open Device Manager, locate the tuner or unidentified USB device, and choose Update driver to browse to the extracted folder.

1. Check device recognition. Restart Windows if prompted. Open Device Manager and confirm that the tuner appears without a warning icon. If installation fails, recheck the model, system architecture, and operating-system support before trying another package.

1. Set up TV reception. Connect a suitable antenna, open compatible TV software, select the AVerMedia A868 USB ATSC, and scan for channels. Reception depends on local ATSC broadcasts, antenna placement, and signal strength—not just the driver.

Common Issues and Fixes

• Installer fails or rolls back: Run the A868 setup as Administrator in Windows compatibility mode, temporarily disable antivirus, and remove any older AVerMedia tuner software first. Reboot before retrying.
• Device not detected: Plug the A868 directly into a rear USB 2.0 port, not a hub or front-panel port. Check Device Manager for an unknown USB device or error Code 43, then reinstall the driver. Confirm an ATSC antenna is connected for tuning.
• Driver/version conflicts: Uninstall previous AVerMedia USB tuner drivers and related TV software, select “Delete driver software” in Device Manager, reboot, then install the package matching the A868. Avoid mixing Media Center, NextPVR, or older AVerMedia drivers.