Xerox Document Centre 255 Driver

The Xerox Document Centre 255 driver connects your Xerox printer to Windows, allowing applications to send print jobs with the correct settings. It is useful when setting up the device on a new computer, restoring printing after a system change, or troubleshooting missing print options.

Key Features

• Printer communication: Helps Windows recognize the Xerox Document Centre 255 and send documents to the appropriate print queue.
• Print settings: Provides access to supported options such as paper size, orientation, copy count, and duplex printing, depending on the driver and device configuration.
• Paper handling: Lets you select available paper sources and match print settings to the media loaded in the printer.
• Windows setup: Supports printer installation and configuration when you choose a package compatible with your Windows edition and system architecture.

How to Install Xerox Document Centre 255 Driver

1. Check your Windows version. Identify whether you use Windows 11, 10, 8, or 7, then check your system architecture. For Windows 10/11, confirm that the selected package explicitly supports your system; legacy printer drivers may have compatibility limitations.
2. Choose the correct package. Before starting your Xerox Document Centre 255 driver download for Windows, review the compatibility notes and select the latest version available for your operating system. Use a trusted, free download source and avoid packages that require unrelated software.
3. Prepare the printer. Turn on the device and confirm that your computer can reach it through the intended connection. For a network installation, have the printer’s IP address or shared queue name ready.
4. Install the driver. Extract the downloaded archive if necessary, then run the installer and follow its instructions. If no installer is included, use Windows printer settings to add the device and browse to the extracted driver files when prompted.
5. Verify printing. Open the printer’s properties and print a test page. Check paper selection and any installed accessories if the available settings do not match your device.

Keep your driver updated when a compatible release addresses a printing issue or supports a Windows change. Before you update, review the release notes and retain a copy of your working package so you can restore it if needed.

Common Issues and Fixes

• Installer fails on newer Windows: The Document Centre 255 uses legacy drivers. Run the Xerox setup as administrator, use the PCL driver rather than a raw INF, and temporarily disable driver signature enforcement if Windows blocks it.
• Device not detected: For network models, ping the printer’s IP, create a Standard TCP/IP port manually, and confirm the copier’s IP settings. For local connections, reseat or replace the cable and check Device Manager.
• Driver/version conflicts: Remove old Xerox print queues and drivers in Print Management, reboot, then install only the current Xerox Document Centre 255 driver; avoid mixing PCL and PostScript drivers on the same queue.