Ricoh Aficio MP 6500 PS Driver

The Ricoh Aficio MP 6500 PS driver lets Windows send print jobs to your Ricoh multifunction printer using PostScript, helping preserve document layout, fonts, and graphics. It is intended for users setting up the printer on a new PC, restoring missing print options, or troubleshooting an existing installation.

Key Features

• PostScript printing: Supports the PS printing workflow for office documents, PDFs, and graphics, with output controlled through the printer’s driver settings.
• Print preference controls: Provides access to settings such as paper size, orientation, copy count, and duplex printing, depending on the installed configuration.
• Paper handling and finishing: Lets you configure available trays and supported finishing accessories so the print dialog reflects the equipment attached to your printer.
• Windows setup options: Helps connect compatible Windows applications to the printer. For Windows 11, 10, 8, or 7, check that the selected package explicitly supports your operating system and architecture.

How to Install Ricoh Aficio MP 6500 PS Driver

1. Check your Windows version. Open your system information and confirm the operating system and whether it is 32-bit or 64-bit. For Windows 10/11, verify compatibility in the package details rather than assuming an older driver will work.
2. Choose the correct package. When selecting a Ricoh Aficio MP 6500 PS driver download for Windows, confirm the model and PS driver type. Use a trusted source for a free download, and choose the latest version compatible with your system.
3. Prepare the printer connection. Make sure the printer is powered on and reachable. For a network installation, obtain its IP address or shared printer path before starting.
4. Install the driver. Extract the downloaded files if necessary, then run the installer. If no installer is included, use Windows’ Add printer wizard and select “Have Disk” when prompted to locate the driver files.
5. Verify the setup. Select the correct printer port, review installed trays and accessories, and print a test page. If output fails, check the connection and confirm that the printer supports the selected PostScript configuration.

Keep the driver updated when Ricoh provides a compatible release that addresses your needs. An update may resolve printing issues or improve Windows compatibility, but review the release notes first and retain your working settings before making changes.

Common Issues and Fixes

• Install fails or hangs: Run the Ricoh PS driver installer as administrator. Remove any existing MP 6500 queue and old Ricoh driver package in Print Management, reboot, then reinstall. Confirm you downloaded the correct 32/64-bit PS package.
• Device not detected: Use a Standard TCP/IP port with the copier’s fixed IP, not WSD. Verify the MP 6500 is on the same subnet, SNMP is enabled, and firewall allows raw printing (9100) or LPR.
• Driver/version conflicts: Uninstall older Ricoh PCL/PS drivers and remove stale ports before installing. If two versions remain, delete the driver package from Print Management, restart the spooler, and add the queue again.