HP LaserJet Professional M1130 MFP Series Driver

The HP LaserJet Professional M1130 MFP Series driver helps Windows communicate with your multifunction printer so you can send print jobs and access supported device functions. If you are setting up this HP printer for the first time, reinstalling Windows, or troubleshooting connection problems, installing the correct driver is an important starting point.

Key Features

• Reliable printer communication: Enables Windows applications to send documents to the printer and use its supported printing options.
• Print settings access: Provides controls for paper size, orientation, and print quality, depending on the driver package.
• Multifunction support: Packages that include scanning software can also enable document scanning; a basic print driver may not include this functionality.
• Windows compatibility options: Choose a package appropriate for Windows 11, 10, 8, or 7, checking the specific release’s compatibility information before downloading.

How to Install HP LaserJet Professional M1130 MFP Series Driver

1. Check your Windows configuration. Open your system information to confirm your Windows version and whether it is 32-bit or 64-bit. For Windows 10/11, verify that the selected package explicitly supports your system rather than assuming an older installer will work.
2. Select the appropriate package. Before starting your HP LaserJet Professional M1130 MFP Series driver download for Windows, review the supported models, operating systems, and included components. Choose the latest version compatible with your setup, especially if you need scanning as well as printing.
3. Download from a trusted source. Use an official HP source where available. A legitimate driver is normally a free download and should not require purchasing a third-party driver updater.
4. Run the installer. Turn on the printer, open the downloaded file, and follow the prompts to install the software. If connecting by USB, attach the cable when the installer instructs you to do so.
5. Test the setup. Restart Windows if requested, then print a test page. If you installed scanning components, test a scan separately to confirm that both functions are available.

Keep your driver updated when HP provides a compatible release that addresses a problem or improves compatibility. An update can help after Windows changes, but the newest package is not always suitable for every older system. Review compatibility notes first, and keep a working installer available in case you need to reinstall.

Common Issues and Fixes

• Install fails or stalls on Windows 10/11: Run the HP M1130 MFP installer as administrator and in Windows 7 compatibility mode if needed. Disconnect the USB cable until prompted, and remove any existing HP LaserJet M1130 entries in Print Management first.
• Device not detected: Use a known-good USB 2.0 cable and port, avoid hubs, power-cycle the M1130 MFP, then reconnect only when the installer asks. Confirm both printer and scanner functions appear in Device Manager.
• Driver/version conflicts: Uninstall older HP M1130 drivers and delete leftover driver packages in Print Management, then install the correct 32-bit or 64-bit package. Do not mix a universal HP driver with the M1130 full-feature driver.