Kyocera FS 1135mfp KX Driver

The Kyocera FS 1135mfp KX driver enables Windows applications to send print jobs to your Kyocera multifunction printer and gives you access to its printing preferences. Install the appropriate package to configure paper handling, adjust output settings, and keep everyday document printing straightforward.

Key Features

• Print settings in one place: Access options such as paper size, orientation, copy count, and print quality through the Windows printer preferences.
• Flexible paper handling: Select the available paper source and media type to match the document you are printing and the paper loaded in the device.
• Two-sided printing controls: Configure duplex printing for supported jobs to reduce paper use and create neatly organized multipage documents.
• KX printing interface: Use Kyocera’s driver interface to manage available printer options. The settings shown can vary with the driver version and device configuration.

How to Install

1. Check your Windows version. Choose a driver package that explicitly supports your installed edition of Windows 11, 10, 8, or 7. Match the package to your system architecture, such as 32-bit or 64-bit, where applicable; not every release supports every Windows version.
2. Prepare the printer. Turn on the Kyocera FS 1135mfp and check that it is ready. For network printing, connect it to the same network as your computer. If using USB, follow the installer’s instructions about when to attach the cable.
3. Open the downloaded package. Extract compressed files if necessary, then run the setup program. Allow administrator permissions when prompted and follow the installation instructions.
4. Select the correct device. Choose the detected printer or add it using its network address if detection fails. If the package has no setup program, use Windows’ Add printer option and browse to the extracted driver files when asked.
5. Confirm successful printing. Open the printer’s properties, check the paper and duplex settings, and print a test page. Set it as your default printer if it will handle most of your print jobs.

The KX package is intended for printing. Scanning and fax functions may require separate Kyocera software or drivers, so check those requirements if you need the device’s other multifunction features.