Xerox DocuColor 2060 Driver

The Xerox DocuColor 2060 driver helps Windows communicate with this production color printing system over a network, translating print jobs into instructions its controller can process. It is intended for print-room staff, office administrators, and anyone setting up or restoring access to a shared DocuColor 2060.

Key Features

• Network printing support: Connects compatible Windows computers to the printer through its configured network address or a shared print queue.
• Print job settings: Provides access to supported options such as paper size, orientation, copy count, and output settings.
• Controller-specific functionality: Makes available the printing features supported by the installed Xerox print controller and its matching driver package.
• Consistent workstation setup: Helps administrators configure compatible print queues across Windows 11, 10, 8, and 7 systems, subject to package availability and controller compatibility.

How to Install Xerox DocuColor 2060 Driver

1. Identify your configuration. Check your Windows version, system architecture, and the print controller attached to the DocuColor 2060. For Windows 10/11, confirm explicit compatibility rather than assuming an older package will work.
2. Choose the correct package. Before starting your Xerox DocuColor 2060 driver download for Windows, review the supported operating systems and controller requirements. Select the latest version that matches your setup; a free download should not require a third-party driver subscription.
3. Prepare the network connection. Make sure the printer is reachable from your computer. Obtain its IP address or shared queue name from the printer configuration or your network administrator.
4. Install the driver. Extract the downloaded files if needed, then run the installer. If the package uses manual installation, open Windows printer settings, add the network printer, and use “Have Disk” when prompted to select the driver files.
5. Test the setup. Print a test page and check the available paper and output options. If printing fails, verify the queue address and controller match before trying another package.

Keep the driver updated when a compatible release addresses printing problems or changes in your Windows environment. Before an update, note your existing queue settings and review any installation instructions, especially on older production systems where controller compatibility matters more than simply choosing the newest package.

Common Issues and Fixes

• Install fails or stalls: Run the Xerox driver package as administrator, stop the Print Spooler service, clear stuck jobs, restart the spooler, then reinstall the correct 32-/64-bit package for your Windows version.
• Device not detected: The DocuColor 2060 often needs a manual port. Confirm the copier’s IP address, ping it, then add a Standard TCP/IP port in Windows instead of relying on WSD auto-discovery.
• Driver/version conflicts: Remove old DocuColor 2060, generic Xerox, and PCL/PostScript drivers via Print Management, clear the queue, reboot, and install one matching driver only. Set the new DocuColor 2060 queue as default.