VIA Rev 5 or later USB Universal Host Controller Driver

The VIA Rev 5 or later USB Universal Host Controller driver lets Windows communicate with the VIA USB controller built into compatible motherboards and expansion hardware. You may need it when reinstalling Windows, troubleshooting a controller warning in Device Manager, or restoring connections to USB peripherals, including printers. Although listed under the printer category, this is a USB host controller driver—not a replacement for your printer’s own software.

Key Features

• USB controller support: Helps Windows recognize and operate compatible VIA Universal Host Controller hardware.
• Peripheral connectivity: Provides the controller-level support needed for devices such as USB keyboards, mice, and printers to communicate with the system.
• Device Manager identification: A correctly matched driver can resolve missing-driver warnings and identify the controller properly.
• Legacy hardware maintenance: Supports troubleshooting on older VIA-based systems, where driver selection depends on the controller’s hardware ID and Windows version.

How to Install VIA Rev 5 or later USB Universal Host Controller Driver

1. Identify your controller. Open Device Manager and look under “Universal Serial Bus controllers” or “Other devices.” Open the device’s Properties, select Details, and choose Hardware Ids to confirm which VIA controller you have.
2. Check Windows compatibility. Before choosing a VIA Rev 5 or later USB Universal Host Controller driver download for Windows, verify support for your specific edition of Windows 11, 10, 8, or 7 and its 32-bit or 64-bit architecture. Legacy packages may not support Windows 10/11.
3. Choose a trusted source. Check Windows Update first, then your motherboard or computer manufacturer’s support resources. If choosing a free download, confirm that it matches your hardware and is the latest version compatible with your system—not simply the newest package available.
4. Install the matching driver. Run the supplied installer, if available. For an extracted driver package, right-click the controller in Device Manager, select Update driver, and browse to the extracted folder. Do not force an incompatible driver to install.
5. Restart and test. Restart if prompted, check Device Manager for warnings, and reconnect your USB devices. If a printer still fails to work, check its separate printer driver and connection.

Keep the driver updated through Windows Update or manufacturer-approved releases when an update addresses compatibility or reliability. If the controller already works correctly, avoid replacing a functioning Windows-provided driver with an unverified legacy package.

Common Issues and Fixes

• Install fails or rolls back: Use the VIA package matching your Windows version and architecture; run setup as administrator and close USB-related utilities. Check Device Manager for code 10/28, then retry or update manually via “Browse my computer.”
• Controller/device not detected: Enable USB Legacy/USB Controller support in BIOS, try a rear motherboard port, remove USB hubs, and run “Scan for hardware changes.” If the UHCI controller shows a warning, uninstall it and reboot.
• Version conflicts with Windows’ inbox UHCI driver: Roll back or uninstall the VIA driver with “Delete the driver software,” reboot, and let Windows install its signed UHCI driver. Reinstall VIA’s package only if a specific fix is required.