USB2-F-7x01 CANPlus Port (COM13) Driver

The USB2-F-7×01 CANPlus Port (COM13) driver helps Windows recognize the Easysync USB device and provides the virtual COM-port connection used by compatible software. It is intended for users setting up a CANPlus interface, restoring a missing serial port, or troubleshooting communication between the adapter and their application.

Key Features

• USB-to-COM connectivity: Makes the device’s serial interface available to compatible applications through a Windows COM port.
• Supported Windows platforms: Intended for Windows 10, 8.1, 7, Vista, and XP; check the individual driver package for operating-system and architecture requirements.
• Device recognition: Provides the driver components Windows needs to identify and configure the interface instead of leaving it listed as an unknown device.
• Application setup support: Lets you select the assigned COM port in your communication software. COM13 is the current port designation, but Windows may assign a different number after installation or when changing USB connections.

How to Install USB2-F-7×01 CANPlus Port (COM13) Driver

1. Check your system. Confirm your Windows edition and whether it is 32-bit or 64-bit. For Windows 10/11 systems, note that Windows 10 is listed as supported, while Windows 11 compatibility is not confirmed here.
2. Choose a compatible package. Before starting your USB2-F-7×01 CANPlus Port (COM13) driver download for Windows, verify that the package identifies your Easysync device and operating system. Look for the latest version that explicitly supports your setup, rather than assuming every newer release supports older Windows editions.
3. Download and prepare the files. Use a trusted source for a free download, then extract the archive if necessary. Read any included instructions before connecting or disconnecting the adapter.
4. Install the driver. Run the supplied installer, if available. Alternatively, open Device Manager, locate the adapter or unknown device, choose the driver update option, and browse to the extracted driver folder.
5. Verify the connection. Restart Windows if prompted, then check Device Manager under Ports (COM & LPT). Confirm that the device appears without a warning icon and select its assigned COM number in your application.

Keep the driver updated when Easysync provides a compatible release that addresses your needs. Before an update, review compatibility notes and retain a working installer so you can restore your previous setup if communication problems occur.