Sony Ericsson Device 117 USB WMC Device Management (COM15) Driver

The Sony Ericsson Device 117 USB WMC Device Management (COM15) driver helps Windows recognize the device’s USB management interface and allows compatible software to communicate with it. You may need it when connecting supported Sony Ericsson hardware to a PC, restoring an unrecognized device, or troubleshooting a missing management port in Device Manager.

Key Features

• USB management communication: Provides the driver support needed for compatible Sony Ericsson software to access the device’s management interface over USB.
• COM-port recognition: Helps Windows identify the interface associated with COM15. Windows may assign a different COM number depending on your computer’s configuration.
• Legacy Windows support: Intended for Windows 10, 8.1, 7, Vista, and XP, subject to the compatibility requirements of the specific driver package.
• Device detection troubleshooting: Installing the correct package may resolve missing-driver warnings or recognition problems caused by an absent or incompatible driver.

How to Install Sony Ericsson Device 117 USB WMC Device Management (COM15) Driver

1. Check your system. Confirm your Windows version and whether it uses a 32-bit or 64-bit architecture. If you are comparing Windows 10/11 compatibility, note that Windows 11 is not included in the listed supported operating systems.
2. Choose a compatible package. Before starting your Sony Ericsson Device 117 USB WMC Device Management (COM15) driver download for Windows, check the package’s supported hardware and operating systems. For any free download, verify the source and publisher rather than relying on the filename alone.
3. Prepare the files. Extract the archive if needed and review any included instructions. Connect the Sony Ericsson device with a working USB data cable when prompted.
4. Install the driver. Run the supplied installer, if available. For a manual installation, open Device Manager, locate the matching device, select Update driver, and browse to the extracted driver folder. Follow the prompts without bypassing security warnings.
5. Verify detection. Restart Windows if requested, then reconnect the device. Check Device Manager for warning icons and confirm that your compatible management software can detect the interface.

Keep the driver updated when a verified, compatible release addresses a problem you are experiencing. The latest version is not necessarily the best match for every legacy device, so check compatibility before you update and retain a working driver package in case you need to restore it.