Sony Ericsson Device 1039 USB WMC NoMTP Interface Driver

The Sony Ericsson Device 1039 USB WMC NoMTP Interface driver helps Windows recognize and communicate with this specific USB interface on a connected Sony Ericsson device. It is intended for users whose device appears as an unknown entry in Device Manager or whose existing driver is missing or not working correctly.

Key Features

• Interface recognition: Helps Windows identify the Sony Ericsson Device 1039 USB WMC NoMTP Interface rather than leaving it listed as an unrecognized USB device.
• Driver-level communication: Provides the connection layer that compatible software needs to interact with this interface. Available functions depend on the connected device and its software.
• Legacy Windows coverage: Listed operating systems include Windows 10, 8.1, 7, Vista, and XP. Select a package that explicitly supports your Windows version and system architecture.
• Targeted compatibility: Designed for the named NoMTP interface; it should not be assumed to enable MTP file transfers or camera features simply because the download is categorized under Camera.

How to Install Sony Ericsson Device 1039 USB WMC NoMTP Interface Driver

1. Check your device details. Open Device Manager, locate the connected device, and review Properties > Details > Hardware Ids. Match these identifiers to those supported by the driver package.
2. Confirm package compatibility. Before choosing a Sony Ericsson Device 1039 USB WMC NoMTP Interface driver download for Windows, check the supported operating systems and whether the package is for 32-bit or 64-bit Windows. The listing identifies Intel as the vendor, so verify the package details rather than relying on the vendor label alone.
3. Download and prepare the files. Choose a trusted free download source and extract the archive if necessary. Look for installation instructions and check the publisher or digital signature where available.
4. Install the driver. Run the supplied installer, or right-click the device in Device Manager, select Update driver, and browse to the extracted driver folder. Follow the prompts without bypassing security warnings.
5. Reconnect and test. Restart Windows if requested, reconnect the device, and check Device Manager for remaining errors.

Keep the driver updated when a compatible release addresses a connection problem or supports your setup. Choose the latest version verified for your hardware, not merely the newest package available. For Windows 10/11 users, note that Windows 10 is listed as supported, while Windows 11 compatibility is not confirmed. Before any update, retain a working driver copy so you can restore it if needed.

Common Issues and Fixes

• Install fails (Code 10/28 or unsigned driver): Run the Sony Ericsson/PC Companion installer as administrator and use the x64 signed INF on 64-bit Windows. If Windows blocks it, temporarily disable driver signature enforcement, then update the “Sony Ericsson Device 1039 USB WMC NoMTP Interface” in Device Manager by pointing to the extracted driver folder—not a generic MTP driver.
• Device not detected/unknown USB device: Use a known-good data cable and a rear USB 2.0 port, not a hub. Set the phone to the correct PC Suite/Media Transfer USB mode, uninstall hidden Sony Ericsson devices in Device Manager, reconnect, and reinstall PC Companion.
• Version conflicts with older Sony Ericsson/Intel USB drivers: Uninstall prior PC Suite/Media Go and the device driver (select “Delete driver software”), reboot, then install the latest compatible package. Block Windows Update from replacing it with a generic driver if the WMC NoMTP interface disappears.