Sony Ericsson Device 1018 USB WMC OBEX Interface (COM10) Driver

The Sony Ericsson Device 1018 USB WMC OBEX Interface (COM10) driver helps Windows recognize the phone’s USB OBEX interface, which compatible software can use for exchanging files and other objects. It is intended for users connecting a supported Sony Ericsson device by USB, especially when Device Manager shows a missing driver or phone-management software cannot detect the connection.

Key Features

• USB interface recognition: Helps Windows identify the Sony Ericsson OBEX interface rather than leave it listed as an unknown device.
• Object exchange support: Enables the communication interface used by compatible applications for OBEX-based transfers; available functions depend on the phone and software.
• COM port identification: Associates the interface with a Windows COM port. Although this device is labeled COM10, Windows may assign a different port number after installation or reconnection.
• Legacy Windows compatibility: Listed operating systems include Windows 10, 8.1, 7, Vista, and XP. Select a package that explicitly matches your Windows release and system architecture.

How to Install Sony Ericsson Device 1018 USB WMC OBEX Interface (COM10) Driver

1. Check your system and device. Confirm your Windows version and whether it is 32-bit or 64-bit. In Device Manager, check the interface’s hardware IDs to help verify that the driver package matches.
2. Choose a compatible package. Before starting your Sony Ericsson Device 1018 USB WMC OBEX Interface (COM10) driver download for Windows, review the package’s supported systems and source. Look for the latest version compatible with your device, not simply the newest available release. For Windows 10/11 systems, note that Windows 11 support is not established by the compatibility list above.
3. Download and prepare the files. If a free download is offered, verify that it contains the intended driver rather than an unrelated utility. Scan the downloaded files and extract the archive if necessary.
4. Install the driver. Run the included installer and follow its connection instructions. If no installer is provided, connect the phone, locate its interface in Device Manager, choose Update driver, and browse to the extracted driver folder.
5. Verify the connection. Restart Windows if prompted, then check that the interface appears without a warning icon. Test detection or a supported transfer using compatible phone-management software.

Keep the driver updated when a verified, compatible update addresses a connection problem or improves stability. If the current driver works reliably, avoid replacing it with an unverified package, and retain a copy of the working installer for recovery.