SMART Board (0x90) - on USB Driver

The SMART Board (0x90) – on USB driver helps Windows recognize the connected interactive board as an input device and handle supported touch or pen input. It is intended for users setting up a USB-connected SMART Board, restoring input after a Windows reinstall, or troubleshooting a board that appears as an unknown device.

Key Features

• USB device recognition: Helps Windows identify the SMART Board input interface when the appropriate driver is installed.
• Input communication: Supports communication between the board and Windows so compatible applications can receive supported input.
• Device management: Allows you to check driver status and troubleshoot detection issues through Windows Device Manager.
• Legacy Windows support: Listed operating systems include Windows 10, 8.1, 7, Vista, and XP. Match the package to your Windows version and system architecture before installation.

How to Install SMART Board (0x90) – on USB Driver

1. Confirm the device identity. Connect the board by USB, open Device Manager, and locate its entry under input devices or Other devices. Check its hardware IDs if you need to distinguish it from another connected device.
2. Check compatibility. Before choosing a SMART Board (0x90) – on USB driver download for Windows, verify the supported operating system and whether your installation is 32-bit or 64-bit. Microsoft is the listed vendor for this device entry; that does not necessarily identify the board manufacturer.
3. Obtain the correct package. Look for the latest version compatible with your hardware through Windows Update or an official support source. If using a free download, verify the source and digital signature rather than relying on the filename alone.
4. Install the driver. Run the provided installer, if included. For an extracted driver package, right-click the device in Device Manager, select Update driver, and browse to the folder containing the driver files.
5. Test the board. Restart Windows if prompted, reconnect the USB cable, and check input response. Some board functions may require additional SMART software or calibration.

Keep the driver updated when a compatible update addresses connection problems or input issues. For Windows 10/11 setups, check support separately: Windows 10 is listed for this entry, but Windows 11 compatibility is not confirmed. If an update causes problems, use Device Manager’s rollback option when available.