Sierra Wireless Gobi 2000 HS-USB NMEA 9001 (COM5) Driver

The Sierra Wireless Gobi 2000 HS-USB NMEA 9001 (COM5) driver helps Windows recognize the modem’s NMEA serial interface, which can provide GPS positioning data to compatible applications when supported by the hardware and configuration. It is useful if you are restoring a laptop’s mobile broadband hardware, troubleshooting an unrecognized USB interface, or setting up software that reads location data through a COM port.

Key Features

• NMEA serial communication: Allows compatible navigation and location applications to communicate with the Gobi 2000 module’s positioning interface.
• USB device recognition: Helps Windows identify the NMEA component correctly rather than leaving it listed as an unknown device.
• COM port access: Makes the interface available as a serial port. Although this device is labeled COM5, Windows may assign a different port number after installation.
• Legacy Windows support: Intended for compatible configurations running Windows 10, 8.1, 7, Vista, or XP. Choose a package that matches your system architecture and hardware identifiers.

How to Install Sierra Wireless Gobi 2000 HS-USB NMEA 9001 (COM5) Driver

1. Confirm the device identity. Open Device Manager and locate the NMEA interface under Ports (COM & LPT) or an unidentified-device category. Check Properties > Details > Hardware Ids to verify that the package matches your hardware; the listed vendor is Qualcomm Atheros.
2. Check your Windows version. Confirm whether your system uses 32-bit or 64-bit Windows. For Windows 10/11 systems, note that Windows 10 is listed as supported, but Windows 11 compatibility is not confirmed.
3. Select the appropriate package. Before proceeding with a Sierra Wireless Gobi 2000 HS-USB NMEA 9001 (COM5) driver download for Windows, review the supported devices and installation requirements. If choosing a free download, use a trusted source and avoid unrelated driver-update utilities.
4. Install the driver. Extract the downloaded archive if necessary, then run its installer. If no installer is included, select Update driver in Device Manager and browse to the extracted driver folder.
5. Verify operation. Restart if prompted, then check that the interface appears without a warning icon. Configure your location application to use the assigned COM port.

Keep the driver updated when a compatible release addresses a problem or improves reliability. The latest version is only useful if it supports your exact module and operating system, so verify compatibility before you update. This NMEA driver handles the positioning interface; other modem functions may require separate drivers.