MetraTec DeskID RFID Reader (COM3) Driver

The MetraTec DeskID RFID Reader (COM3) driver enables Windows to communicate with this Metratec USB RFID reader through a serial COM port. It is intended for users setting up the reader for the first time, restoring communication after a Windows reinstall, or troubleshooting a device that their RFID software cannot detect.

Key Features

• USB communication support: Provides the connection needed for compatible RFID applications to communicate with the DeskID reader.
• COM-port access: Allows software to address the reader through its assigned serial port. Although the device name includes COM3, Windows may assign a different port on your computer.
• Support for older Windows systems: Listed supported operating systems include Windows 10, 8.1, 7, Vista, and XP. Choose a package that matches your Windows version and system architecture.
• Device recognition: Helps Windows identify the reader correctly when the appropriate driver is missing or needs to be reinstalled.

How to Install MetraTec DeskID RFID Reader (COM3) Driver

1. Check your system. Confirm your Windows version and whether it is 32-bit or 64-bit. For Windows 10/11 setups, note that Windows 10 is listed as supported; Windows 11 compatibility should be verified with Metratec before installation.
2. Choose the correct package. Before starting the MetraTec DeskID RFID Reader (COM3) driver download for Windows, check the package’s device compatibility and release notes. Select the latest version that explicitly supports your operating system. If offered as a free download, still verify its source and publisher.
3. Install the driver. Extract the downloaded archive if necessary, then follow the included instructions. Run the installer if provided, or use Device Manager to update the device driver and browse to the extracted driver folder.
4. Connect and verify the reader. Follow any instructions about when to plug in the USB device. Open Device Manager and check that the reader appears without a warning symbol, typically under Ports (COM & LPT).
5. Configure your RFID application. Select the COM port shown in Device Manager rather than assuming it is COM3. Use the communication settings specified in the reader’s documentation, then test the connection.

Keep the driver updated when a compatible release addresses a connection issue or supports a system change. Before you update a working installation, review the release notes and retain the previous installer so you can restore your setup if needed.