Kyocera TASKalfa 3500i KX Driver

The Kyocera TASKalfa 3500i KX driver allows Windows applications to send print jobs to the Kyocera TASKalfa 3500i multifunction printer and access its printing options. For network-connected setups, it helps your PC communicate with the printer and apply settings such as paper selection, duplex printing, and output layout. Select a driver package that explicitly supports your version of Windows 11, 10, 8, or 7.

Key Features

• Network printing support: Connect to a shared office printer or configure a direct connection using the device’s IP address.
• Print settings in one place: Adjust paper size, orientation, copy count, and print quality through the KX driver’s printing preferences.
• Duplex and layout controls: Use supported two-sided printing and multiple-pages-per-sheet options to reduce paper use and organize documents.
• Installed accessory configuration: Configure available paper trays and finishing equipment so the driver presents options that match your printer’s hardware.

How to Install

1. Check your Windows system. Confirm your Windows version and whether it uses a 32-bit or 64-bit architecture. Download the matching Kyocera TASKalfa 3500i KX package, checking its listed operating system compatibility before installation.

1. Prepare the network connection. Turn on the printer and ensure your computer can reach it on the network. If you plan to add it by IP address, find that address in the printer’s network settings or on a printed status page.

1. Run the installer. Extract the downloaded files if necessary, then open the setup program. Allow administrator access when prompted and follow the installation instructions.

1. Select or add the printer. Choose the detected TASKalfa device. If it does not appear, use the installer’s manual network option, where available, or add a printer in Windows using its IP address and select the extracted driver.

1. Verify the configuration. Open Printer properties, check that installed trays and accessories are correctly configured, and print a test page. Review Printing preferences to set your usual paper size and duplex settings.

If installation succeeds but printing fails, check the printer’s connection and confirm that the configured port points to its current IP address. For a printer shared through an office print server, ask your administrator which connection and driver package to use.