KODAK 5500 AiO Driver

The KODAK 5500 AiO driver lets Windows communicate with your Kodak all-in-one printer so you can print and scan using compatible software. You may need it when setting up the device, reconnecting it after a Windows reinstall, or troubleshooting a printer that is no longer detected. Although sometimes listed under Camera downloads, the KODAK 5500 AiO is an all-in-one printer, so check the model and package details before installing.

Key Features

• Enables communication between the KODAK 5500 AiO and a compatible Windows computer for everyday printing.
• Supports scanning when the required scanner driver and compatible Kodak software are included in the package.
• Provides access to supported print settings, such as paper size, orientation, and print quality.
• Can help resolve driver-related detection problems or restore functionality after a system change.

How to Install KODAK 5500 AiO Driver

1. Check your Windows version and system type. The listed supported systems are Windows 10, 8.1, 7, Vista, and XP; confirm that the specific download matches your operating system and 32-bit or 64-bit installation.
2. Review the KODAK 5500 AiO driver download for Windows and select the latest version compatible with your system. If a free download is available, verify its source and model information rather than relying on the download title alone.
3. Close open applications and run the downloaded installer. Approve the Windows permission prompt only if you trust the package. Connect the printer when the setup instructions ask you to.
4. Follow the prompts to install the driver and any included scanning components. Restart your computer if requested.
5. Turn on the printer, check that Windows recognizes it, and print a test page. If you need scanning, test that separately in a compatible scanning application.

Keep a working driver unless an update addresses a problem or improves compatibility. For Windows 10/11, check support carefully: Windows 10 is listed for this device, but Windows 11 compatibility is not confirmed here. Before updating, review the package notes and keep a copy of your working installer in case you need to restore the previous setup.

Common Issues and Fixes

• Install fails or stalls: Disconnect the KODAK 5500 AiO USB cable until the installer asks for it, run the Kodak setup as administrator, and temporarily disable antivirus. If setup still fails, uninstall partial Kodak software, restart Windows, and reinstall the driver matching your Windows version.
• Device not detected: Connect the AiO directly to a USB 2.0 port with a known-good cable, not a hub. Power-cycle the printer. For wireless, confirm PC and printer are on the same 2.4 GHz network and check Device Manager for unknown USB/network devices.
• Driver/version conflicts: Remove older Kodak ESP/AiO drivers and printer entries in Devices and Printers, stop the print spooler, delete stuck jobs, restart the spooler, then install the latest KODAK 5500 AiO package. Avoid mixing old Kodak software with the new driver.