HP Remote Control HID Device Driver

The HP Remote Control HID Device driver helps Windows recognize a compatible HP remote control interface and process its button inputs. You may need it if your HP remote stops responding, appears as an unknown device in Device Manager, or needs to be set up after reinstalling Windows.

Key Features

• Remote input recognition: Enables Windows to identify the HP Remote Control HID Device and handle supported remote commands.
• Media control support: Helps compatible applications respond to playback, navigation, and other buttons available on your remote.
• Device identification: A matching driver can resolve missing-driver warnings for this device in Device Manager.
• Windows compatibility: Driver options may cover Windows 11, 10, 8, and 7; select a package that explicitly supports your HP model and Windows version.

How to Install HP Remote Control HID Device Driver

1. Check your system details. Confirm your HP computer model, Windows version, and whether your system uses a 32-bit or 64-bit architecture. For Windows 10/11, open Settings > System > About to find these details.
2. Identify the device. Open Device Manager and locate the HP Remote Control HID Device or an unidentified device associated with the remote receiver. If necessary, check Properties > Details > Hardware Ids to help confirm a match.
3. Choose a compatible package. Before starting an HP Remote Control HID Device driver download for Windows, verify the supported operating systems and hardware. Look for the latest version offered for your model through HP support or Windows Update. A free download should not require a paid driver-updater subscription.
4. Install the driver. If the package includes an installer, run it and follow its instructions. For an extracted driver folder, right-click the device in Device Manager, select Update driver > Browse my computer for drivers, and choose the folder.
5. Restart and test. Restart if prompted, then check Device Manager for remaining warnings. Test the remote in a compatible application; if it still fails, check its batteries and receiver connection before reinstalling.

Keep the driver updated when a compatible update addresses a problem or supports a Windows change. Use a trusted source, avoid packages intended for other HP models, and keep a working driver available in case you need to roll back.

Common Issues and Fixes

• Install fails or shows Code 10/28: Use the HP package that matches your Windows version and architecture, run it as administrator, and point Device Manager to the extracted driver folder. If it still fails, uninstall the existing “HP Remote Control HID Device” entry with “Delete the driver software,” restart, and rescan.
• Device not detected: Check remote batteries and re-pair it per HP instructions. For USB receivers, try a direct rear USB port and avoid hubs; for IR remotes, confirm line of sight. In Device Manager, use Scan for hardware changes.
• Version conflicts after a Windows update: Remove duplicate HID consumer-control or HP remote entries, restart, then reinstall the latest HP driver. If an update broke it, use Roll Back Driver or reinstall the previous HP version.