Highpoint RocketRAID 2314 Driver

The Highpoint RocketRAID 2314 needs a dedicated Windows storage driver to manage connected SATA drives, maintain RAID arrays, and avoid device detection errors. This package gives Windows 11, Windows 10, Windows 8, and Windows 7 the required controller support, so the adapter is recognized correctly and attached disks remain accessible without performance drops.

Key Features

• Allows the RocketRAID 2314 controller to appear as a healthy storage device in Device Manager across supported Windows editions.
• Supports RAID 0, 1, 5, 10, and JBOD configurations, letting Windows manage arrays with the speed or redundancy settings defined in the controller BIOS.
• Improves SATA drive detection and stability, including boot-time array assembly and hot-swap behavior on compatible systems.
• Provides both 32-bit and 64-bit driver support for Windows 11, Windows 10, Windows 8, and Windows 7 installations.

How to Install

1. Download the Highpoint RocketRAID 2314 driver package and extract the contents to a local folder you can easily access.
2. Open Device Manager and find the controller under Storage controllers or Other devices. Right-click the entry and select Update driver.
3. Choose Browse my computer for drivers, then click Browse and point Windows to the extracted folder that contains the driver INF file.
4. Follow the on-screen prompts to complete the installation. If a User Account Control prompt appears, confirm the action to proceed.
5. Restart your PC when Windows finishes installing the driver. After reboot, verify the controller shows no yellow warning icon and your RAID volumes are visible in Disk Management.

Common Issues and Fixes

• Windows install fails or drive not shown: Load the correct HighPoint RocketRAID 2314 driver during Setup via Load Driver from USB; use the matching 32/64-bit package and ensure the array is initialized in the controller BIOS first.
• Device not detected: Reseat the card in the PCIe slot, confirm drives are connected and powered, and enable the RocketRAID option ROM/RAID BIOS. Check Device Manager for unknown RAID controller entries.
• Driver/software version conflicts: Uninstall older HighPoint drivers and RAID Management software before installing the new package. Use the RocketRAID 2314-specific driver; do not mix legacy and current versions, and roll back if Windows updates replace it.