Fujitsu HS-USB NMEA 1362 (COM5) Driver

The Fujitsu HS-USB NMEA 1362 (COM5) driver enables Windows to recognize the device’s USB-based NMEA serial interface, allowing compatible software to access positioning data when supported by the underlying hardware. Associated with Qualcomm Atheros hardware, this driver is intended for users setting up the interface on a Fujitsu system or troubleshooting an unrecognized device, missing COM port, or communication problem.

Key Features

• USB-to-serial interface support: Helps Windows expose the NMEA interface as a COM port that compatible navigation or diagnostic applications can use.
• NMEA data communication: Provides the connection needed for supported software to receive positioning messages from the hardware; satellite reception and positioning availability depend on the device and its configuration.
• Legacy Windows compatibility: Supported operating systems include Windows 10, 8.1, 7, Vista, and XP. Choose a package that matches your Windows version and system architecture.
• Device recognition: Installing the correct package can resolve driver-related detection issues and help distinguish this interface from other ports provided by the same hardware.

How to Install Fujitsu HS-USB NMEA 1362 (COM5) Driver

1. Confirm the device identity. Open Device Manager and locate Fujitsu HS-USB NMEA 1362 (COM5), or check any unidentified USB device. Compare its hardware IDs with those listed in the driver package.
2. Select a compatible package. Before starting your Fujitsu HS-USB NMEA 1362 (COM5) driver download for Windows, check the supported operating system and whether your installation is 32-bit or 64-bit. For Windows 10/11 systems, note that Windows 11 support is not confirmed by the supplied compatibility list.
3. Download and extract the files. Use a trusted source for a free download, and review any included installation instructions. Avoid packages that do not identify compatible hardware.
4. Install the driver. Run the supplied installer, if available. Otherwise, right-click the device in Device Manager, select Update driver, and browse to the extracted driver folder.
5. Verify operation. Restart if prompted, then check Device Manager for warnings. Select the assigned COM port in your application; Windows may assign a port number other than COM5.

Keep the driver updated when a compatible release addresses a problem or improves support for your system. The latest version is not always the best match for older hardware, so verify compatibility before you update and retain a working driver package for recovery.