The Fujifilm FinePix T400 connects to a Windows PC so you can copy photos and videos from the camera for storage, viewing, and editing. The appropriate driver helps Windows recognize the camera over USB, although Windows may provide the necessary support automatically without a separate Fujifilm driver installation.

Key Features

• USB device recognition: Helps the computer detect the FinePix T400 when it is connected with a compatible USB data cable.
• Photo and video transfer: Enables access to stored images and recordings through supported Windows import tools or file-browsing options.
• Windows integration: Works with the operating system’s device-management functions to establish the camera connection and identify recognition problems.
• Access to original files: Supports copying camera files to your PC for backup and organization; a driver does not change image quality or add camera features.

How to Install

1. Check your Windows version. Before downloading anything, confirm whether your PC runs Windows 11, 10, 8, or 7. If a separate driver package is available, check that its documentation explicitly supports your Windows version and system architecture. Do not assume an older package supports newer Windows releases.

1. Prepare the camera and connection. Make sure the battery has enough charge and use a compatible USB cable that supports data transfer. Keep the camera disconnected while reviewing any instructions supplied with the download.

1. Install only if needed. Windows may recognize the camera using built-in support when you connect it. If a verified, compatible driver package is required, extract it if necessary, run its installer, and follow the prompts. Restart the PC if requested.

1. Connect the FinePix T400. Plug the camera directly into a USB port on the computer, turn it on, and follow the camera manual’s instructions for a computer connection. Allow Windows to finish setting up the device before starting a transfer.

1. Verify file access. Open a supported photo-import application or check File Explorer for the camera or its storage. Copy a few files to confirm the connection works, then safely disconnect the camera when the transfer is complete.

If the camera is not detected, try another USB port or data cable and check Device Manager for an error. A compatible memory card reader is also a practical way to transfer files without relying on a direct camera connection.

Common Issues and Fixes

• Installer fails or rolls back on Windows 10/11: The FinePix T400’s bundled software is legacy. Run the installer as administrator in Windows 7/8 compatibility mode, or skip it—Windows usually accesses the T400 using its built-in MTP/USB Mass Storage driver.
• Camera not detected: Set the T400 to playback/PC connection mode, use a data-capable USB cable (not charge-only), connect directly to a rear USB port, and check Device Manager for an unknown device. Try another cable/port.
• Version conflicts with older FinePix software/drivers: Uninstall previous Fujifilm FinePix software and old USB camera drivers, restart, then let Windows install its native driver. Do not stack multiple T400 driver packages over each other.