The Dynex USB 2.0 2 in 1 Memory Card Reader DX CR112 lets you access files on compatible memory cards through a USB connection. Its driver allows Windows to recognize the reader and communicate with inserted cards so you can browse, copy, and manage your files.

Key Features

• USB device recognition: Helps Windows identify the Dynex card reader and make an inserted, readable memory card available in File Explorer.
• File transfer support: Enables access to photos, documents, and other files stored on compatible cards, with transfers handled through the reader’s USB 2.0 connection.
• Windows integration: Works with standard Windows storage functions, including drive-letter assignment and safe removal.
• Built-in driver support: Windows may configure the reader automatically using its included USB storage drivers, making a separate download unnecessary.

How to Install

1. Connect the reader. Plug the Dynex DX CR112 directly into an available USB port on your computer. For initial setup, avoid an unpowered USB hub.

1. Allow Windows to detect it. On Windows 11, 10, 8, or 7, wait for Windows to finish setting up the device. Insert a compatible memory card and check File Explorer for a new drive. If the card opens normally, no additional driver installation is needed.

1. Check compatibility before downloading. If the reader is not working, confirm that any available driver package specifically supports the DX CR112 and your Windows version. Do not assume that a package intended for an older release will work on Windows 11 or Windows 10.

1. Install or update the driver. If a compatible package includes an installer, run it and follow its prompts. For a package containing driver files only, extract it, open Device Manager, locate the reader or unidentified USB device, choose Update driver, and browse to the extracted folder. Menu wording may vary by Windows version.

1. Verify operation. Restart if prompted, reconnect the reader, and test it with a known-working memory card. If no drive appears, try another USB port and check Device Manager for errors before reinstalling anything.

Always eject the memory card through Windows before removing it from the reader, especially after copying files, to reduce the risk of incomplete writes or data loss.

Common Issues and Fixes

• Driver install fails: Unplug the DX-CR112 reader, run the installer as administrator, and use Windows compatibility mode for older packages. Reboot before reconnecting the reader to a direct USB port.
• Device not detected: Try a rear USB 2.0 port without a hub. Check Device Manager for “Unknown Device” or USB Mass Storage errors, reseat the memory card, and test another card/slot.
• Version conflicts: Remove old Dynex or generic card-reader drivers, including hidden devices, then let Windows reinstall its USB Mass Storage driver. Avoid forcing newer chipset drivers onto this USB 2.0 reader.