The D Link DU 560M driver allows Windows to recognize this D-Link USB dial-up modem and communicate with it correctly. Installing the appropriate driver helps make the modem available for connection setup and can resolve detection problems caused by a missing or incompatible driver.

Key Features

• Modem recognition: Provides the device-specific software Windows needs to identify the DU 560M rather than leave it listed as an unknown device.
• Dial-up connection support: Enables Windows and compatible communications software to access the modem for connections over a suitable telephone line.
• Device configuration: Makes modem settings and diagnostic information accessible through Windows tools, helping you check whether the hardware is responding.
• Driver recovery: Reinstalling a matching package can restore communication after a Windows reinstall or an unsuccessful driver change.

How to Install

1. Check your Windows version. Confirm whether you use Windows 11, 10, 8, or 7, and check your system architecture in Windows system information. Before downloading, verify that the package explicitly supports your operating system and the D Link DU 560M; older modem drivers may not support newer Windows releases.

1. Download and extract the driver. Choose a package intended for this exact model. If it arrives as a compressed archive, extract its contents to a folder you can easily locate.

1. Follow the included setup instructions. Run the installer if one is provided, allowing administrator access when prompted. Connect the modem when the installation instructions tell you to do so.

1. Use Device Manager if necessary. If there is no installer, connect the modem, locate its entry in Device Manager, and select Update driver. Choose the option to browse your computer, then point Windows to the extracted driver folder.

1. Verify operation. Restart if requested and check that the modem appears without a warning icon. Connect a suitable telephone line and configure your dial-up service using the connection details supplied by your provider.

A driver alone does not provide internet service. If Windows rejects the package as incompatible or unsigned, look for a supported driver rather than disabling security checks.

Common Issues and Fixes

• Install fails or rolls back: Run the DU-560M setup as administrator, unblock the downloaded ZIP before extracting, and use Windows Compatibility Mode if the package targets older Windows versions. Reboot before retrying.
• Adapter not detected: Connect the DU-560M directly to a rear USB 2.0 port, avoid unpowered hubs, and try another USB cable/port. Check Device Manager for an unknown USB device, then reinstall USB/chipset drivers.
• Driver/version conflicts: Uninstall older D-Link or generic USB Ethernet drivers in Device Manager, remove leftover adapter software, and install the DU-560M package last. Disable other Ethernet adapters while testing.