The Conexant Falcon II NTSC Video Capture driver enables Windows to recognize the capture hardware and make it available to compatible video-recording software. It provides the connection between the device and the operating system, allowing supported applications to receive video from an NTSC source.

Key Features

• Hardware recognition: Helps Windows identify the Conexant capture device rather than list it as an unknown multimedia controller.
• NTSC video capture support: Enables compatible software to access the device’s analog video-capture functions when a supported source is connected.
• Application access: Provides the driver interface needed for recording applications to detect and select the capture hardware.
• Device management: Allows you to check the installed driver and review hardware status through Windows Device Manager.

How to Install

1. Check the hardware and Windows version. Open Device Manager and locate the capture device, which may appear under “Sound, video and game controllers” or “Other devices.” Confirm its hardware IDs and whether your Windows installation is 32-bit or 64-bit before choosing a package.

1. Verify package compatibility. Select a driver intended for the Conexant Falcon II NTSC Video Capture hardware and your operating system. For Windows 11, 10, 8, or 7, check the package’s stated support rather than assuming one release works across all versions. Older capture hardware may have limited compatibility with newer Windows installations.

1. Download and extract the files. Save the driver package to a local folder. If it is compressed, extract it before starting installation, and review any included instructions for model-specific requirements.

1. Install the driver. Run the included setup program if available. Otherwise, right-click the device in Device Manager, choose “Update driver,” select “Browse my computer for drivers,” and point Windows to the extracted folder. If Windows reports an incompatible or unsigned driver, obtain a suitable package instead of bypassing security checks.

1. Restart and test capture. Restart if prompted, then confirm that Device Manager shows no warning icon for the device. Open a compatible capture application, select the Conexant device, and choose the appropriate NTSC input settings. Connect a working video source and make a short test recording to check the result.

Common Issues and Fixes

• Install fails or rolls back: Run the setup as administrator and use Windows compatibility mode for the driver’s intended OS. If Windows blocks an unsigned Conexant capture driver, disable driver signature enforcement temporarily, then reinstall.
• Device not detected: Check Device Manager for an unknown video controller or Conexant Falcon II entry. Reseat the capture card, try another slot, then scan for hardware changes and point Windows to the driver INF manually.
• Version conflicts: Uninstall older Conexant video-capture drivers and remove hidden devices first. Reboot, then install the correct 32-bit/64-bit package matching your Windows version; avoid mixing generic and vendor drivers.