The CH Pro Pedals USB driver helps Windows recognize the pedal controller and make its rudder and toe-brake inputs available to compatible flight simulators. Before downloading, check that the manufacturer’s package supports your version of Windows 11, 10, 8, or 7, as compatibility can vary between driver releases.

Key Features

• USB device recognition: Helps establish communication between the CH Pro Pedals USB and Windows so supported software can detect the controller.
• Rudder and brake input support: Makes pedal-axis movement available for assigning yaw control and separate left and right toe brakes in compatible simulators.
• Calibration access: Works with supported Windows controller settings or manufacturer utilities to help you check pedal travel, center position, and input response.
• Simulator configuration support: Provides the device interface used by compatible applications to read pedal inputs. Axis assignments and sensitivity settings are typically configured within your simulator.

How to Install

1. Check your Windows version. Confirm whether you use Windows 11, 10, 8, or 7, then review the download’s compatibility notes. Also check whether the package requires a particular system architecture or additional manufacturer software.
2. Download the appropriate package. Choose the manufacturer’s driver intended for the CH Pro Pedals USB. If the download includes configuration software, read its instructions before starting, especially any guidance on when to connect the pedals.
3. Run the installer. Extract the files if necessary, open the setup program, and approve the Windows permission prompt. Follow the installation instructions and restart your computer if requested.
4. Connect and test the pedals. Plug the controller into an available USB port, preferably directly on the computer during initial setup. Open Windows game controller settings or the supported manufacturer utility to confirm that rudder movement and both toe brakes respond.
5. Configure your flight simulator. Assign the rudder and brake axes, check their direction, and adjust sensitivity or dead zones as needed. If an axis behaves unexpectedly, review duplicate control assignments before reinstalling the driver.

If Windows already detects the pedals correctly, check the manufacturer’s guidance before adding another driver or utility. A separate package may be needed only for specific configuration features rather than basic controller recognition.

Common Issues and Fixes

• Install fails or stalls: Disconnect the CH Pro Pedals USB before running the installer, then run it as administrator. If it still fails, temporarily disable antivirus and use Windows compatibility mode for the installer.
• Device not detected: Plug the pedals directly into a rear USB port, not an unpowered hub. Check Device Manager under “Human Interface Devices” and “Game Controllers.” Reconnect, then open “Set up USB game controllers” and verify/calibrate the rudder and toe-brake axes.
• Version conflicts after upgrading: Uninstall any old CH Products software/Control Manager and remove stale game-controller entries in Device Manager, including hidden devices. Reboot, reconnect the pedals, and install only the current driver package.