The Canon MP460 Printer driver allows Windows to communicate with your printer, send print jobs, and apply settings such as paper size and print quality. Before downloading, check that the package supports your Windows version and system architecture—especially on Windows 11 or Windows 10, where official support for older hardware may be limited.

Key Features

• Print settings control: Adjust paper type, page layout, orientation, and quality through the driver’s printing preferences.
• Document and photo output: Access the settings needed to prepare everyday documents and photos for printing on compatible media.
• Device status information: A compatible Canon software package may provide printer status messages and guidance for resolving common printing issues.
• Multifunction support: Scanning requires compatible scanner software or a scanner driver, which may be supplied separately from the printer driver.

How to Install

1. Check your Windows system. Confirm whether you use Windows 11, 10, 8, or 7, then check whether your installation is 32-bit or 64-bit. Do not assume that a package intended for an older version will work on a newer one.

1. Choose a compatible download. Select a Canon MP460 Printer driver that explicitly lists your operating system. If no matching package is available, check Canon’s support information before trying an older driver.

1. Prepare the printer. Load paper, make sure the ink cartridges are installed, and turn on the device. For a USB installation, leave the cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.

1. Run the installer. Open the downloaded file, approve the Windows permission prompt if it appears, and follow the setup instructions. Connect the printer directly to an available USB port when prompted, then allow installation to finish.

1. Verify the setup. Open your Windows printer settings, select the Canon MP460, and print a test page. If you also need scanning, install the compatible scanner component and test it separately.

If Windows does not detect the printer, check the USB connection and restart both devices. Avoid installing unrelated Canon drivers simply because their model names look similar; a correct model and operating-system match is the best starting point for reliable operation.

Common Issues and Fixes

• Install fails or stalls: Disconnect the MP460, cancel any previous Canon setup, remove old MP460 entries from Devices and Printers and Programs and Features, reboot, then run the Canon setup as administrator. Connect USB only when prompted.
• Printer not detected: Use a direct rear USB port instead of a hub, try another data-capable USB cable, power-cycle the MP460, and check Device Manager for unknown USB devices or printing support entries.
• Driver/version conflicts: Remove generic or duplicate MP460/WSD queues in Devices and Printers, then install the correct Canon MP460 driver for your Windows version. If setup still fails, run it in compatibility mode for an older Windows version.