The Canon LBP252DW driver allows Windows to communicate with your Canon laser printer and send print jobs with the correct settings. For network printing, it helps your computer connect to the printer and access options such as paper selection, print quality, and two-sided output. Choose a driver package that explicitly supports your version of Windows 11, 10, 8, or 7.

Key Features

• Network printing support: Enables printing over a wired or wireless local network once the printer is connected and accessible from your PC.
• Print layout controls: Provides settings for paper size, orientation, copy count, and multiple pages per sheet, depending on the selected driver.
• Automatic duplex options: Lets you configure two-sided printing for everyday documents, helping reduce paper use.
• Output preferences: Gives you access to supported resolution and toner-saving settings so you can balance document clarity with routine printing needs.

How to Install

1. Check your Windows version. Confirm which edition of Windows you are running and whether it requires a 32-bit or 64-bit driver. Check the package’s compatibility information before downloading.
2. Prepare the printer connection. Turn on the Canon LBP252DW and connect it to your router using Ethernet or Wi-Fi. Your computer should be on the same local network for initial discovery.
3. Download and launch the installer. Save the matching Canon driver package, extract it if necessary, and run the setup program. Allow administrator access if Windows prompts you.
4. Select the network printer. Follow the installation prompts and choose the LBP252DW from the detected devices. If it does not appear, check its network connection or use its IP address if the installer offers that option.
5. Verify the installation. Open your Windows printer settings, confirm that the printer is listed, and print a test page. Review the default paper size and duplex preferences before sending regular documents.

If setup cannot find the printer, check that your network allows communication between devices; guest Wi-Fi may block discovery. Avoid installing a package intended for a different printer model or an unsupported Windows version.

Common Issues and Fixes

• Install fails or rolls back: Remove existing Canon LBP252DW/UFR II entries in Programs and Features, reboot, then run the installer as administrator. Connect USB only when prompted.
• Device not detected on network: Confirm the printer and PC are on the same subnet, assign/reserve a fixed IP for the LBP252DW, allow the Canon installer through Windows Firewall, and test with USB to rule out hardware.
• Version or port conflicts: Delete old Canon printer ports and leftover drivers with Canon’s uninstaller, then install the correct 32/64-bit package for your Windows version. Avoid mixing Generic Plus and UFR II drivers.