The Canon Color imageRUNNER C2620 C3220 driver connects your Windows PC to the printer, allowing applications to send documents with the appropriate print settings. Installing a compatible Canon driver helps you configure output options and troubleshoot problems such as missing printer settings or jobs that fail to print.

Key Features

• Windows printing support: Provides the software interface needed to send print jobs from Windows applications to your Canon printer.
• Color and document controls: Offers access to available color, paper size, orientation, and print-quality settings so you can adjust output for different documents.
• Paper handling options: Lets you select supported paper sources and two-sided printing where those features are available and configured.
• Device configuration: Helps Windows recognize installed printer accessories and expose the relevant options, depending on the driver package and hardware setup.

How to Install

1. Check your Windows version. Before downloading, confirm whether you use Windows 11, 10, 8, or 7 and check your system architecture. This is an older printer series, so verify that the selected package explicitly supports your operating system; compatibility should not be assumed across all Windows versions.

1. Choose the matching driver. Select a Canon package that lists your exact model—Color imageRUNNER C2620 or C3220. If several driver types are offered, choose one supported by the printer’s installed configuration or follow your network administrator’s recommendation.

1. Prepare the printer connection. Turn on the printer and make sure it is ready. For a network installation, connect your PC to a network that can reach the printer and have its IP address or shared printer name available.

1. Run the installer. Extract the download if necessary, open the setup program, and follow the prompts. If the package has no installer, use Windows printer settings to add the printer manually and browse to the extracted driver files when asked.

1. Confirm settings and test. Open the printer’s properties, check the paper trays and any installed accessories, then print a test page. If output is incorrect or options are missing, review the selected driver, printer port, and device configuration before reinstalling.

Common Issues and Fixes

• Install fails or setup stops: Confirm the package matches the exact model (C2620 vs C3220) and Windows architecture. Run setup as administrator, close other Canon installers, and reboot before retrying; mismatched UFR II/PCL packages can abort installation.
• Device not detected: Verify the copier’s IP address and that the PC can ping it. Create a Standard TCP/IP port using that IP, enable LPD/RAW or WSD on the imageRUNNER, and avoid auto-discovery if it fails.
• Version conflicts/duplicate queues: Remove old Canon imageRUNNER queues and drivers in Print Management, restart the Print Spooler service, then install the current driver. Keep only one driver version per architecture.