The Brother MFC 9700 USB driver enables Windows to communicate with your Brother multifunction printer over a USB connection. It helps applications send print jobs correctly and provides access to the printing options supported by the installed driver. For Windows 11, 10, 8, or 7, check the download’s compatibility details before installation, as driver availability and functionality can vary by operating system.

Key Features

• USB printer communication: Allows Windows to recognize the connected Brother MFC 9700 USB and route print jobs to it.
• Print settings access: Provides controls for supported options such as paper size, page orientation, and print quality.
• Application printing support: Lets you select the printer from the print dialog in document editors, PDF readers, and other Windows applications.
• Queue management: Integrates with Windows printing tools so you can view pending jobs, cancel unwanted documents, and check printer status where supported.

How to Install

1. Check your Windows version. Open your system information and confirm both the Windows edition and system architecture. Choose a driver package that explicitly supports your configuration; do not assume a Windows 7 or 8 package will work on Windows 10 or 11.

1. Prepare the printer. Turn on the Brother MFC 9700 USB, load paper, and clear any errors shown on its control panel. If you are using a setup program, leave the USB cable disconnected until the installer asks you to connect it.

1. Download and open the driver package. Save the compatible download to your computer. Extract it if necessary, then run the setup program and approve the Windows permission prompt if requested.

1. Complete the connection. Follow the installation prompts and select USB when asked for a connection type. If the package contains driver files without an installer, use Windows’ Add Printer wizard and browse to the extracted driver folder when prompted.

1. Confirm successful printing. Find the printer in Windows’ printer settings and print a test page. If it does not appear, check the USB cable, try a direct computer USB port, and review any installation messages.

Printing support does not automatically include scanning or fax functions. Those features may require separate compatible software, so review the package description if you need more than basic printing.

Common Issues and Fixes

• Install fails or stalls: Run the Brother MFC-9700 installer as administrator and in Windows compatibility mode for an older OS. Disconnect the USB cable until prompted, close antivirus temporarily, and remove any partial install with Brother’s uninstall tool before retrying.
• Device not detected: Power the MFC-9700 on, connect USB directly to a rear motherboard port (no hub), and try a known-good cable. In Device Manager, remove any unknown/USB printing device, then rescan; check the printer is not offline or in error state.
• Driver/version conflicts: Uninstall all existing MFC-9700 printer and scanner entries, clear stuck print jobs, restart the Print Spooler service, reboot, then install one driver package matching your Windows version and architecture.