The Brother MFC 8690DW Printer driver helps Windows communicate with your multifunction printer, enabling print jobs and access to supported device settings. When setting up the printer on Windows 11, 10, 8, or 7, choose a driver package that matches your operating system and connection method.

Key Features

• Print settings control: Access options such as paper size, orientation, print quality, and automatic two-sided printing through the compatible driver.
• USB and network connectivity: Set up printing over USB or a supported wired or wireless network connection, depending on your installation needs.
• Multifunction support: A full software package may include scanning components and utilities alongside the printer driver. Check the package description if you need more than printing.
• Device configuration: Supported software can help Windows recognize installed printer options and provide access to maintenance or status information.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type. Verify that the selected download explicitly supports your setup; older printer packages may not cover every Windows version.

1. Select the appropriate package. Choose a printer driver for basic printing or a full driver and software package if available and needed for scanning. Use a trusted Brother source and review any installation notes before proceeding.

1. Prepare the printer connection. Turn on the Brother MFC 8690DW and ensure it is ready. For network installation, connect the printer and computer to the same local network. For USB installation, leave the cable disconnected until the installer asks you to connect it.

1. Run the installer. Open the downloaded file, approve the Windows permission prompt if requested, and follow the setup instructions. Select the correct connection type and confirm the printer when it appears in the device list.

1. Verify operation. Restart the computer if prompted, then open Windows printer settings and print a test page. If you installed scanning software, test a scan separately. If the printer is not detected, check the cable or network connection before repeating setup.

Common Issues and Fixes

• Install fails or stalls: Leftover Brother software or security software can block the MFC-8690DW full driver package. Disconnect USB, run Brother’s Driver Uninstall Tool, reboot, temporarily disable antivirus, then reinstall the latest full driver from Brother support—not the Windows Update generic driver.
• Device not detected: For USB, use a direct rear-port connection and a different cable. For network, print the MFC-8690DW network configuration page, confirm the PC and printer are on the same subnet, ping the IP, then add the printer manually by IP address.
• Driver/version conflicts after Windows updates: Remove duplicate MFC-8690DW queues and old Brother ports in Print Management, then reinstall the current driver. If scanning breaks, reinstall Brother iPrint&Scan or the full software suite and set the MFC-8690DW as default.