The Brother MFC 8220 driver allows Windows to communicate with your multifunction laser printer, helping applications send documents with the correct print settings. Installing a suitable driver can also restore printer recognition after a system change or resolve problems caused by a missing driver.

Key Features

• Reliable print communication: Provides the software interface Windows needs to send print jobs to the Brother MFC 8220.
• Document setup controls: Gives access to supported options such as paper size, orientation, copy count, and print quality.
• Windows printer integration: Makes the device available through standard print dialogs, so you can select it from word processors, PDF readers, and other applications.
• Support for multifunction workflows: A compatible full software package may include scanning components or utilities alongside the printer driver. Available features depend on the package and Windows version.

How to Install

1. Check your Windows version. Confirm whether your PC runs Windows 11, 10, 8, or 7, and check its system type where applicable. Because the MFC 8220 is an older model, verify that the selected download explicitly supports your configuration rather than assuming one package works on every version.

1. Choose the appropriate driver. Use a Brother-provided package that matches your operating system and connection method. If no dedicated download is available for your version of Windows, check whether Windows Update offers a compatible printer driver. A basic driver may provide printing without additional multifunction tools.

1. Prepare the printer and computer. Turn on the printer and make sure it has paper and no displayed errors. Close open applications. For a USB installation, leave the cable disconnected until the installer requests it, unless the package instructions say otherwise.

1. Install and connect. Open the downloaded installer, approve the Windows permission prompt if shown, and follow the setup instructions. Connect the printer when prompted. If you are using a built-in Windows driver instead, add the device through Windows printer settings and select the appropriate driver.

1. Verify operation. Find the Brother MFC 8220 in your printer list and print a test page. Check the paper settings and set it as your default printer if desired. If you installed scanning software, test that function separately; successful printing does not necessarily confirm scanner support.

Common Issues and Fixes

• Install fails or stalls: Disconnect the MFC-8220, run the Brother setup as administrator, and remove any previous Brother/MFC-8220 entries in Programs and Features and Device Manager before retrying. Temporarily disable third-party antivirus if setup is blocked.
• Device not detected: Use a known-good USB 2.0 cable and a direct port (avoid hubs), power the MFC-8220 on, and restart the Print Spooler service. For USB installs, connect the cable only when setup prompts.
• Driver/version conflicts: Uninstall old MFC-8220 printer and scanner drivers, clear stuck print jobs, reboot, then install the correct 32/64-bit Windows package. Avoid mixing old WIA/TWAIN scanner drivers with the new package.