The Brother MFC 5890CN driver connects this all-in-one inkjet printer to your Windows PC, allowing software to send print jobs using the correct device settings. Depending on the package you choose, it may also include scanner support and utilities for managing everyday printing and scanning tasks.

Key Features

• Printer-specific settings: Access supported paper sizes, media types, print quality options, and color or grayscale output settings.
• Scanning support: A compatible scanner driver lets supported Windows applications acquire documents and images from the flatbed or automatic document feeder.
• USB and network connectivity: Set up the printer through a direct USB connection or its wired Ethernet interface, depending on your workspace.
• Device status information: Compatible Brother utilities can help display printer status and identify conditions that need attention, such as paper or ink issues.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type where applicable. Driver availability and included features can vary, so verify that the selected package explicitly supports your operating system rather than assuming every package works with all four versions.
2. Choose the appropriate package. Download the printer driver for basic printing, or select a full driver and software package if one is available for your setup and you also need scanning tools. If no package lists your Windows version, consult Brother’s compatibility guidance before proceeding.
3. Prepare the connection. Turn on the Brother MFC 5890CN. For USB installation, leave the cable disconnected until the installer asks for it. For Ethernet setup, connect the printer to the same local network as your computer.
4. Run the installer. Open the downloaded file, allow installation when Windows prompts you, and follow the on-screen instructions. Select the correct connection type and choose your printer when it appears.
5. Verify operation. Restart your computer if requested, then print a test page from Windows printer settings. If you installed scanner support, try scanning a document in a compatible application.

If the printer is not detected, check the USB cable or Ethernet connection before reinstalling. When replacing an older installation, removing duplicate printer entries can also help prevent jobs from being sent to the wrong queue.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable until the installer asks, remove existing MFC-5890CN entries under Devices and Printers, then run the Brother full driver package as administrator and reboot.
• Printer not detected: Confirm the MFC-5890CN is powered on; try a different USB 2.0 port/cable. For Ethernet, verify the printer and PC are on the same subnet and reserve its IP so the port does not break after reboot.
• Driver/version conflicts or scanner missing: Uninstall old Brother MFC-5890CN drivers and software, avoid the Windows generic driver, then install the latest available full package for your Windows version; if needed, run setup in compatibility mode and re-add the scanner.